Additional information
Weight | 2.56 lbs |
---|---|
Dimensions | 14 × 9 × 6 in |
Kit contains 50 disposable lids with 200 micron filters, 50 disposable liners, and 20 sealing plugs. The 200 micron filters are recommended for traditional solvent based paint or primer applications. Graduated measurement to 5 1/2 oz when used with generic mix ratio film insert (mix ratio inserts sold separately). Max. capacity of 6 fl oz. For use with part number 16115. Note: mix ratio film inserts are sold separately.
PPS™ is a complete painting system from 3M™ which produces cleaner jobs, saves on solvent usage and gun cleaning time and can improve operator efficiency by as much as 15%. Specifically designed adapters allow painters to use the PPS™ system with virtually any spray gun.
PPS™ replaces traditional mixing cups and filters and drastically reduces the amount of solvent required for gun cleaning. The liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. It is possible to clean your paint gun with as little as 3 ounces of solvent. With these disposable parts, shops can see a 70% savings in cleaning solvent use — meaning less operator exposure to solvents and reduction in VOCs.
Since PPS™ uses the same cup for mixing and spraying, there less risk of outside contamination, less time spend mixing and cleaning.
$172.13
In StockWeight | 2.56 lbs |
---|---|
Dimensions | 14 × 9 × 6 in |
Area of application
Additive for M/S clear coats to accelerate drying time
Champagne Magnum is sand paper technology at it’s best. It cuts faster, runs cooler, resists loading better and lasts far longer than any conventional sandpaper.
Two-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass). The primary use is to replace quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins. Use with Premium Manual Applicator 200ml 08117, 3M Static Mixing Nozzle 08193.
This product is also sold in our 400 ml size as SMC/FRP Repair – 90, 08274
Designed for use in grinding, sanding and buffing applications in the automotive aftermarket. Lightweight, two-strap filtering facepiece respirators with an adjustable noseclip and new braided headstraps, this respirator helps provide excellent protection.
The Scotch-Brite™ Roloc™ Surface Conditioning Disc is a durable, non-woven disc that includes the efficient 3M™ Roloc™ Quick-Change Attachment System. This disc helps clean, finish, blend, and deburr various surfaces.
The Scotch-Brite™ Roloc™ Surface Conditioning Disc’s open web fibre runs cool and resists loading while the abrasives provide a high cut-rate to give you consistent finishing. The 3M™ Roloc™ Attachment System offers quick and easy disc change-outs, making the Scotch-Brite™ Roloc™ Surface Conditioning Disc ideal for a range of tasks including blending, deburring, and finishing. This disc is available with silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.
Area of Application:
Especially easy to sand, two-component polyester filling putty. To be applied in order to equalize or close possible pin holes, small irregularities, small paint damages or scratches on the body of cars, vehicles or machines. Recommended also to be used as a putty and dowel setting material as well as an adhesive for iron, wood, stone and porcelain.
Characteristic Features:
– adhesive on iron, steel, aluminum, galvanized substrates and glass fiber