your trusted source for automotive paint and refinishing
Shopping Cart$67.20
1
PROUDLY CANADIAN
FREE GROUND SHIPPING ON ORDERS OVER $450
View cart “NORTON 31630 P180B A275 Magnum Sheets (9X11 Sheet)” has been added to your cart.
Sale!
3M 2097 PARTICULATE FILTER, 2097, P100
The 3M™ Particulate Filter 2097 is NIOSH approved for environments containing certain oil and non-oil based particles. 3M recommended for nuisance level organic vapour relief and for ozone protection up to 10X OSHA PEL.
3M™ Particulate Filter 2097 with nuisance level organic vapour relief helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. This filter helps protect against a wide range of oil and non-oil based particulate contaminants. The filter also offers nuisance level odour relief from organic vapours that are below the PEL. Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government exposure limits, whichever is lower. Do not use for respiratory protection against organic vapours or in environments that are Immediately Dangerous to Life or Health (IDLH). The 2097 is commonly used for welding, brazing, torch cutting, metal pouring and soldering. Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. The filter is both flame and water resistant. This filter is commonly used in the following industries: agriculture, construction, general manufacturing, pharmaceuticals, primary metals.
NIOSH approved for environments containing certain oil and non-oil-based particles
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
Nuisance level organic vapour relief
Advanced Electret Media (AEM) provides lightweight, easy breathing comfort
Suggested Applications
Nuisance level organic vapour relief
Welding
Brazing
Soldering
Metal pouring
Torch cutting
Exposure to lead, asbestos, cadmium, arsenic, and MDA
The 3M™ Particulate Filter 2071 is NIOSH approved for environments containing certain oil and non-oil based particles.
Use with 3M™ Respirators, 5000 Series or 3M™ Cartridge, 6000 Series with 3M™ Adapter, 502, or 3M™ Half and Full Facepiece, 6000, 3M™ Half and Full Facepiece, 7000, and 3M™ Half and Full Facepiece, FF-400 Series with bayonet filter holders. When properly fitted, use in a variety of applications such as grinding, sanding and welding for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. The filter is both flame and water resistant. Do not use in environments that are immediately dangerous to life or health (IDLH). 3M offers a wide array of options when it comes to cartridges and filters. 3M™ Respirator Cartridges and Filters offer easy installation to your Powered Air Purifying Respirators (PAPR) or Supplied Air Respirator assembly making them a great choice for fast paced industrial environments.
NIOSH approved for environments containing certain oil and non-oil-based particles
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece designs
Advanced Electret Media (AEM) provides lightweight, easy breathing comfort
Gerson tack cloths are approved by leading Auto, Marine, Aerospace and Electronics manufacturers. We offer a complete assortment of cotton and synthetic tack cloths for high, medium and low-tack applications. Gerson is a leading, prime manufacturer of Tack Cloths for critical surface preparation. A complete range of substrates are available, from lint-free knit polyester to nonwovens to 100% cotton gauze.
Dry tack formulation
Completely removes surface particles without harmful residues
One Step is a high build, easy to use self etch primer that provides excellent adhesion for additional top coats, primers and sealers to metal. Compatible with all primer surfacers for spot repair and refinishing. Apply to steel, aluminum and most metals.
High performance, non sag, high solids two component epoxy sealer. Designed for use where a high quality, fast setting and fast paint time sealer is desired. This product provides the latest in technology for sealing seams and faster paint time thatn the traditional sealers on the market today. With XSM8002, the seam sealer process is no longer the hold up in production. Extrudes easily. Excellent tooling with no shrinkage. uses include body panel seam sealer, truck bed seam sealer, all cosmetic seams, bonding of ground effects, sealing door skins. Compatible with all epoxy and urethane repair material and topcoats. Work time 8-10 minutes
Superior two-part epoxy adhesive designed to bond SMC, FRP, fiberglass, steel and aluminum auto parts and body panels to each other and to metal frames (no primer required). It seals and bonds in one application. The longer work time allows for adequate adjusting and handling. The glass beads mixed in this formulation provide the adequate spacing between parts for optimal bond strength.
MSV-21 2.1 VOC Urethane Clearcoat is a low VOC clear designed for general refinish work. MSV-21 is an easy to apply medium solids clear. MSV-21 2.1 VOC Urethane Clearcoat is versatile and delivers a productive, high gloss finish.
Hardener
• MHV-21F 2.1 VOC Fast Hardener • MHV-21N 2.1 VOC Normal Hardener • MHV-21S 2.1 VOC Slow Hardener
Two-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass). The primary use is to replace quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins. Meets GM 6449G & Chrysler MS-CD 507.
Mask Filters
Reviews
There are no reviews yet.