your trusted source for automotive paint and refinishing
Shopping Cart$0.00
0
PROUDLY CANADIAN
FREE GROUND SHIPPING ON ORDERS OVER $450
Sale!
3M 26325 PPS- Large 650ml 125u
3M™ PPS™ Series 2.0 Spray Cup System Kit, 26325 Large (28 fl oz, 850 mL), 125u Micron Filter, 1 kit per case3M™ PPS™ Series 2.0 Spray Cup System is our next generation, highest-performing 3M™ Paint Preparation System (PPS™) on the disposable spray cup market. Kit contains 50 disposable lids with 200 micron or 125 micron filters, 50 disposable liners, 1 reusable hard shell cup and 32 sealing plugs.
SATA® RPS™ – The disposable cup system for mixing and painting
SATA RPS (Rapid Preparation System) is the ideal cup system for shops focusing on perfect finishes and high profitability.
One cup – four functions
mix paint
paint
refill the paint
store the paint
With only three components!
SATA RPS consists of 3 components only which means less handling efforts and thus, less expenditure of time.
a cup
a lid
a sieve
No additional components are necessary. There is no other cup system with the same functions but with three components only!
Economical
The cleaning of the cup is not necessary with SATA RPS, thus saving time, cleaning agents and cost. Perfect colour match and perfect paint jobs reduce time and cost intensive rework. And the very few components additionally facilitate the entire work process – simplicity pays.
Adapters
Contrary to other disposable cup systems, SATA RPS does not require any adapter in combination with SATA paint spray guns. Therefore, the spray gun can be easily and reliably cleaned. RPS adapters – For older SATA paint spray guns and spray guns of other manufactures spray gun adapters are available.
Used in wet sanding, rough featheredging. Could be used for final sanding of plastic filler and putty. Most flexible backing with more consistent scratch pattern make this 3Ms best wet sanding product.
MSV-21 2.1 VOC Urethane Clearcoat is a low VOC clear designed for general refinish work. MSV-21 is an easy to apply medium solids clear. MSV-21 2.1 VOC Urethane Clearcoat is versatile and delivers a productive, high gloss finish.
Hardener
• MHV-21F 2.1 VOC Fast Hardener • MHV-21N 2.1 VOC Normal Hardener • MHV-21S 2.1 VOC Slow Hardener
Two-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass). The primary use is to replace quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins. Meets GM 6449G & Chrysler MS-CD 507.
Patterned, precise mineral structures give Trizact™ abrasives the combination of fast cut and consistent finish every time. Use P1000 foam blending discs for scuff sanding blend panels prior to painting. Use P1500 clearcoat sanding discs for leveling dust nibs and sanding of mismatched orange peel. Finally, use P3000 foam disc for removing P1200-P1500 grade sand scratches prior to use of 3M™ Perfect-It™ polishing system. Foam disc used in a spot repair system for removing sanding scratches before using rubbing compound.
SATA® RPS™ – The disposable cup system for mixing and painting
SATA RPS (Rapid Preparation System) is the ideal cup system for shops focusing on perfect finishes and high profitability.
One cup – four functions
mix paint
paint
refill the paint
store the paint
With only three components!
SATA RPS consists of 3 components only which means less handling efforts and thus, less expenditure of time.
a cup
a lid
a sieve
No additional components are necessary. There is no other cup system with the same functions but with three components only!
Economical
The cleaning of the cup is not necessary with SATA RPS, thus saving time, cleaning agents and cost. Perfect colour match and perfect paint jobs reduce time and cost intensive rework. And the very few components additionally facilitate the entire work process – simplicity pays.
Adapters
Contrary to other disposable cup systems, SATA RPS does not require any adapter in combination with SATA paint spray guns. Therefore, the spray gun can be easily and reliably cleaned. RPS adapters – For older SATA paint spray guns and spray guns of other manufactures spray gun adapters are available.
For dry sanding old paint, primer, primer surfacer, and between-color coats; also for deburring, removing sand scratches, shaping and finishing plastic filler, and featheredging repaired areas. Special No-Fil coating prevents premature loading. Can be cut into halves or thirds to fit neatly on jitterbug sanders.
Advanced G3 Liquid is a one-step system that provides a fast cutting action and a high gloss finish. It combines all the reliability and other advantages of G3 Paste with a reduced clean up time when compounding by machine. It provides the user with improved versatility, quality and speed to final finish verses competitive products. AG3 has been tested against all major paint brands and has proven compliant to remove defects from all modern paint systems. Using the product with water will result in maximum performance benefits. – See more at: http://www.farecla.com/automotive/compounding-systems/advanced-g3-liquid-compound#sthash.PtrlmFor.dpuf
PPS Cups System
