16′ X 350′ PLASTIC OVERSPRAY SHEETING IS AN ECONOMICAL WAY TO PROTECT SURFACES NOT BEING PAINTED. A THIN MIL PLASTIC SHEETING THAT IS FAST AND EASY TO HANDLE AND APPLY. IT WILL CLING TO SURFACES BEING MASKED AND RESISTS TEARING WHEN PULLING OR REPOSITIONING. SINCE IT IS CORONA TREATED PAINT WILL ADHERE WITHOUT FLAKING OFF, WHILE RESISTING SOLVENT PENTRATION AND PAINT BLEED THROUGH.
3M™ Overspray Protective Sheeting, 06727 is a paintable, high-density, tear-resistant, translucent film designed for critical edge masking as well as protection from paint overspray. Twelve foot film accommodates smaller cars.
SATA® RPS™ – The disposable cup system for mixing and painting
SATA RPS (Rapid Preparation System) is the ideal cup system for shops focusing on perfect finishes and high profitability.
One cup – four functions
mix paint
paint
refill the paint
store the paint
With only three components!
SATA RPS consists of 3 components only which means less handling efforts and thus, less expenditure of time.
a cup
a lid
a sieve
No additional components are necessary. There is no other cup system with the same functions but with three components only!
Economical
The cleaning of the cup is not necessary with SATA RPS, thus saving time, cleaning agents and cost. Perfect colour match and perfect paint jobs reduce time and cost intensive rework. And the very few components additionally facilitate the entire work process – simplicity pays.
Adapters
Contrary to other disposable cup systems, SATA RPS does not require any adapter in combination with SATA paint spray guns. Therefore, the spray gun can be easily and reliably cleaned. RPS adapters – For older SATA paint spray guns and spray guns of other manufactures spray gun adapters are available.
NIOSH approved against certain organic vapors, acid gases, ammonia methylamine, formaldehyde with P100 particulate filter
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
Wide range of applications reduces inventory needs
To establish cartridge replacement frequency visit: 3M.com/ServiceLifeSoftware
Details
The 3M™ Multi-Gas/Vapour Cartridge/Filter 60926 is NIOSH approved against certain organic vapours, acid gasses and particulates. Use with 3M™ Half and Full Facepiece Respirators 6000, 7000 and FF-400 Series with bayonet filter holders.
3M™ Multi-Gas/Vapour Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapours, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are Immediately Dangerous to Life or Health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, oil and gas, and primary metals.
NIOSH approved against certain organic vapors, acid gases, ammonia methylamine, formaldehyde with P100 particulate filter
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
Wide range of applications reduces inventory needs
To establish cartridge replacement frequency visit: 3M.com/ServiceLifeSoftware
3M™ Dry Guide Coat is used to identify surface imperfections such as pinholes in body filler and deep scratches in primer. Unlike liquid and aerosol guide coats, Dry Guide Coat requires no masking before use, and there is no dry time after application. The dry formula contains no intentionally added solvents and doesn’t clog sandpaper while delivering easier cleanup.
Champagne Magnum is sand paper technology at it’s best. It cuts faster, runs cooler, resists loading better and lasts far longer than any conventional sandpaper.
Premium heat-treated grain extends life and gives a 30 – 50% faster cut rate
Premium B-Weight latex paper backing improves performance, is more flexible and easier disc removal
FEPA P-graded grain achieves a more consistent uniform scratch pattern
Re-designed bond system optimizes grain adhesion and extends cut life
Newest water based stearate No-Fil improves load resistance
No pigment in No-Fil or bond eliminates the risk of color transfer and creates a much stronger bond
3M™ Automotive Acrylic Plus Attachment Tape 06382 is a .045-inch thick, medium-density, black acrylic foam tape with high performance acrylic adhesives on both sides and a red release liner.
Acrylic Plus Attachment Tapes are OEM approved and are stronger, higher performing, high stress handling products than other automotive attachment tapes. Typical applications include body side moldings, rocker panel moldings, claddings, wheel flares, bumper trim and other exterior and interior automotive trim components.
Plastic Sheeting
