For dry sanding old paint, primer, primer surfacer, and between-color coats; also for deburring, removing sand scratches, shaping and finishing plastic filler, and featheredging repaired areas. Special No-Fil coating prevents premature loading. Can be cut into halves or thirds to fit neatly on jitterbug sanders.
SATA® RPS™ – The disposable cup system for mixing and painting
SATA RPS (Rapid Preparation System) is the ideal cup system for shops focusing on perfect finishes and high profitability.
One cup – four functions
mix paint
paint
refill the paint
store the paint
With only three components!
SATA RPS consists of 3 components only which means less handling efforts and thus, less expenditure of time.
a cup
a lid
a sieve
No additional components are necessary. There is no other cup system with the same functions but with three components only!
Economical
The cleaning of the cup is not necessary with SATA RPS, thus saving time, cleaning agents and cost. Perfect colour match and perfect paint jobs reduce time and cost intensive rework. And the very few components additionally facilitate the entire work process – simplicity pays.
Adapters
Contrary to other disposable cup systems, SATA RPS does not require any adapter in combination with SATA paint spray guns. Therefore, the spray gun can be easily and reliably cleaned. RPS adapters – For older SATA paint spray guns and spray guns of other manufactures spray gun adapters are available.
NIOSH approved against certain organic vapors, acid gases, ammonia methylamine, formaldehyde with P100 particulate filter
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
Wide range of applications reduces inventory needs
To establish cartridge replacement frequency visit: 3M.com/ServiceLifeSoftware
Details
The 3M™ Multi-Gas/Vapour Cartridge/Filter 60926 is NIOSH approved against certain organic vapours, acid gasses and particulates. Use with 3M™ Half and Full Facepiece Respirators 6000, 7000 and FF-400 Series with bayonet filter holders.
3M™ Multi-Gas/Vapour Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapours, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are Immediately Dangerous to Life or Health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, oil and gas, and primary metals.
NIOSH approved against certain organic vapors, acid gases, ammonia methylamine, formaldehyde with P100 particulate filter
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
Wide range of applications reduces inventory needs
To establish cartridge replacement frequency visit: 3M.com/ServiceLifeSoftware
For scuffing before applying paint and primer-surfacer. Also used for used car reconditioning. cleaning upholstery, headlines and door pads, chrome and white wall tires. Rinses clean and does not rust. Can be used over and over again.
XPST Flexible Epoxy is a two-component flexible modified epoxy designed for the repair of flexible plastics. XPST is formulated to work on all flexible plastics including the more common (TPUR, PUR, RIM). XPST is also compatible with the traditional “tough to bond” plastics (PP, TPO, TPE). This product is designed as an adhesive and as a filler to be used on the front and backsides of a repair. XPST can also be used over our Urethane Repair material (XSMAF). XPST is an outstanding flexible filler that is commonly used as a glaze coat over all types of plastics due to its easy sanding and featheredging characteristics. XPST bonds, fills, and sands with outstanding performance. This flexible adhesive/filler is used and approved by automotive OEMs such as GM, Toyota, VW and many others. The “Original Plastic Surgery” as used by the professionals.
16′ X 350′ PLASTIC OVERSPRAY SHEETING IS AN ECONOMICAL WAY TO PROTECT SURFACES NOT BEING PAINTED. A THIN MIL PLASTIC SHEETING THAT IS FAST AND EASY TO HANDLE AND APPLY. IT WILL CLING TO SURFACES BEING MASKED AND RESISTS TEARING WHEN PULLING OR REPOSITIONING. SINCE IT IS CORONA TREATED PAINT WILL ADHERE WITHOUT FLAKING OFF, WHILE RESISTING SOLVENT PENTRATION AND PAINT BLEED THROUGH.
3M™ Dry Guide Coat is used to identify surface imperfections such as pinholes in body filler and deep scratches in primer. Unlike liquid and aerosol guide coats, Dry Guide Coat requires no masking before use, and there is no dry time after application. The dry formula contains no intentionally added solvents and doesn’t clog sandpaper while delivering easier cleanup.
Abrasives
