Additional information
Weight | 9.78 lbs |
---|---|
Dimensions | 12 × 12 × 12 in |
3M – Perfect It Buffing & Polishing Compound 06085 06064 06068
$219.99
In StockWeight | 9.78 lbs |
---|---|
Dimensions | 12 × 12 × 12 in |
Automotive Refinish Masking Tape is designed for masking before painting — it bends and stretches to follow curved body lines with no edge lifting, leaves sharp paint lines, removes easily with no adhesive transfer. Waterborne paint compatible.
24 ROLLS/CASE
Champagne Magnum is sand paper technology at it’s best. It cuts faster, runs cooler, resists loading better and lasts far longer than any conventional sandpaper.
Fine ranges from grade 320 to 400. Flexible foam pad enables user to sand hard-to-reach areas such as headlight openings, around door handles, door jambs, etc. Helps to eliminate finger marks and can be used wet or dry.
3M™ Dry Guide Coat and Applicator Kit is a dry powder with applicator used to highlight surface imperfections and sand scratches prior to finishing with abrasives. When sanding polyester filler, it ensures the end result is flat with no ripples and that the body styling lines and contours are straight and correct. It also ensures the total primed area is sanded prior to top coating. It requires no masking and there is no dry time involved. It can also be used for both wet and dry sanding and contains no solvents. 3M™ Dry Guide Coat and Applicator Kit contains an applicator pad.
Kit contains 50 disposable lids with 200 micron filters, 50 disposable liners, and 20 sealing plugs. The 200 micron filters are recommended for traditional solvent based paint or primer applications. Graduated measurement to 5 1/2 oz when used with generic mix ratio film insert (mix ratio inserts sold separately). Max. capacity of 6 fl oz. For use with part number 16115. Note: mix ratio film inserts are sold separately.
PPS™ is a complete painting system from 3M™ which produces cleaner jobs, saves on solvent usage and gun cleaning time and can improve operator efficiency by as much as 15%. Specifically designed adapters allow painters to use the PPS™ system with virtually any spray gun.
PPS™ replaces traditional mixing cups and filters and drastically reduces the amount of solvent required for gun cleaning. The liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. It is possible to clean your paint gun with as little as 3 ounces of solvent. With these disposable parts, shops can see a 70% savings in cleaning solvent use — meaning less operator exposure to solvents and reduction in VOCs.
Since PPS™ uses the same cup for mixing and spraying, there less risk of outside contamination, less time spend mixing and cleaning.
USCRed Glazing Putty. A one component, fast drying glazing putty with an extra fine texture for filling pinholes, scratches and dimples on bare metal and hardened plastic fibers.