Automotive Refinish Masking Tape is designed for masking before painting — it bends and stretches to follow curved body lines with no edge lifting, leaves sharp paint lines, removes easily with no adhesive transfer. Waterborne paint compatible.
Scotch® Performance Green Masking Tape 233+, 26338 is a highly-conformable tape that provides the best adhesive transfer resistance, hugs curves, contours and provides outstanding paint lines. Goes on quickly and easily, sticks at a touch and stays put. Perfectly balanced to give outstanding masking results.
SATA® RPS™ – The disposable cup system for mixing and painting
SATA RPS (Rapid Preparation System) is the ideal cup system for shops focusing on perfect finishes and high profitability.
One cup – four functions
mix paint
paint
refill the paint
store the paint
With only three components!
SATA RPS consists of 3 components only which means less handling efforts and thus, less expenditure of time.
a cup
a lid
a sieve
No additional components are necessary. There is no other cup system with the same functions but with three components only!
Economical
The cleaning of the cup is not necessary with SATA RPS, thus saving time, cleaning agents and cost. Perfect colour match and perfect paint jobs reduce time and cost intensive rework. And the very few components additionally facilitate the entire work process – simplicity pays.
Adapters
Contrary to other disposable cup systems, SATA RPS does not require any adapter in combination with SATA paint spray guns. Therefore, the spray gun can be easily and reliably cleaned. RPS adapters – For older SATA paint spray guns and spray guns of other manufactures spray gun adapters are available.
Norton Blaze Rapid Strip discs are constructed with thick, strong synthetic fibers and extra-coarse ceramic alumina abrasive. The open web construction of the disc provides fast cutting action with very little loading. Safer than wire bristle tools, Norton Blaze Rapid Strip aggressively removes rust and paint from drip moldings, pinch welds, door jambs, seams and other difficult to reach areas. The TR+ attachment system allows for rugged cleaning in tight areas.
NIOSH approved against certain organic vapors, acid gases, ammonia methylamine, formaldehyde with P100 particulate filter
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
Wide range of applications reduces inventory needs
To establish cartridge replacement frequency visit: 3M.com/ServiceLifeSoftware
Details
The 3M™ Multi-Gas/Vapour Cartridge/Filter 60926 is NIOSH approved against certain organic vapours, acid gasses and particulates. Use with 3M™ Half and Full Facepiece Respirators 6000, 7000 and FF-400 Series with bayonet filter holders.
3M™ Multi-Gas/Vapour Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapours, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are Immediately Dangerous to Life or Health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, oil and gas, and primary metals.
NIOSH approved against certain organic vapors, acid gases, ammonia methylamine, formaldehyde with P100 particulate filter
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
Wide range of applications reduces inventory needs
To establish cartridge replacement frequency visit: 3M.com/ServiceLifeSoftware
Champagne Magnum is sand paper technology at it’s best. It cuts faster, runs cooler, resists loading better and lasts far longer than any conventional sandpaper.
Premium heat-treated grain extends life and gives a 30 – 50% faster cut rate
Premium B-Weight latex paper backing improves performance, is more flexible and easier disc removal
FEPA P-graded grain achieves a more consistent uniform scratch pattern
Re-designed bond system optimizes grain adhesion and extends cut life
Newest water based stearate No-Fil improves load resistance
No pigment in No-Fil or bond eliminates the risk of color transfer and creates a much stronger bond
For dry sanding old paint, primer, primer surfacer, and between-color coats; also for deburring, removing sand scratches, shaping and finishing plastic filler, and featheredging repaired areas. Special No-Fil coating prevents premature loading. Can be cut into halves or thirds to fit neatly on jitterbug sanders.
Tork Low-Lint Cleaning Cloth is a soft yet durable wiper and is perfect for surface preparation and cleaning. This cloth can be used in the Tork Folded Wiper/Cloth Dispenser that protects the refills from dirt and offers an one-at-a time dispensing to reduce consumption and waste.
Soft and flexible – ideal in tight spaces
Meets your cleaning needs due to suitability with most solvents, disinfectants, and detergents
Perfect for working with sensitive surfaces due to antistatic and extremely low-lint properties
3M™ Flexible Foam is a soft and flexible two-part urethane material which foams in place (closed-cell foam). It is designed to replace OEM’s flexible foams found on door intrusion beams, roof bows, inside body panels, pillars, and in other automotive body cavities. Expands to 10 times its original volumeto fill large cavities with a small amount of material. Can be used for OEM replacement of flexible foams to “pre-accident condition” as much as possible.
Adhesive Tape
