Mixing Tips by Evercoat®. Maxim™ Static Mixing Tips are designed to be used with Evercoat’s Maxim™ two-component products 812, 813,815, 816, 822, 823, 885, 886 887, and 898. If you’re looking for a quality product that will serve you for years to come, look no further.
MAXIM™ Fast Urethane Adhesive is a urethane repair material used for non-structural repairs on all plastics, fiberglass and SMC. It is an excellent urethane adhesive for bonding bumper brackets, backing strips, broken SMC/fiberglass pieces and other broken plastic pieces. It is the ideal product when a fast cure time is required (i.e. backside of a two-sided repair.)
This water-based masking fi lm is applied with a spray gun. The liquid material dries to a clear, non-bonding fi lm, protecting all coated vehicle surfaces against spray mist (of solvent and water-based paints), solvents, dust, welding sparks, polish splashes as well as from any light mechanical damage.
Characteristic features
Gravity-fed spray gun for water-based paints. Recommended nozzle size: 1.8–2.2 mm.
SATA® RPS™ – The disposable cup system for mixing and painting
SATA RPS (Rapid Preparation System) is the ideal cup system for shops focusing on perfect finishes and high profitability.
One cup – four functions
mix paint
paint
refill the paint
store the paint
With only three components!
SATA RPS consists of 3 components only which means less handling efforts and thus, less expenditure of time.
a cup
a lid
a sieve
No additional components are necessary. There is no other cup system with the same functions but with three components only!
Economical
The cleaning of the cup is not necessary with SATA RPS, thus saving time, cleaning agents and cost. Perfect colour match and perfect paint jobs reduce time and cost intensive rework. And the very few components additionally facilitate the entire work process – simplicity pays.
Adapters
Contrary to other disposable cup systems, SATA RPS does not require any adapter in combination with SATA paint spray guns. Therefore, the spray gun can be easily and reliably cleaned. RPS adapters – For older SATA paint spray guns and spray guns of other manufactures spray gun adapters are available.
Tough mineral abrasive aggressively deburrs and finishes
Conformable, non-woven disc achieves an aggressive cut
Convenient 3M™ Roloc™ Attachment System offers quick and easy disc change-out for multi-step finishing processes
The Scotch-Brite™ Roloc™ Surface Conditioning Disc is a durable, non-woven disc that includes the efficient 3M™ Roloc™ Quick-Change Attachment System. This disc helps clean, finish, blend, and deburr various surfaces.
The Scotch-Brite™ Roloc™ Surface Conditioning Disc’s open web fibre runs cool and resists loading while the abrasives provide a high cut-rate to give you consistent finishing. The 3M™ Roloc™ Attachment System offers quick and easy disc change-outs, making the Scotch-Brite™ Roloc™ Surface Conditioning Disc ideal for a range of tasks including blending, deburring, and finishing. This disc is available with silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.
Suggested Applications
Use this surface conditioning disc for deburring, finishing, grinding, and doing surface prep on all metals
NIOSH approved against certain organic vapors, acid gases, ammonia methylamine, formaldehyde with P100 particulate filter
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
Wide range of applications reduces inventory needs
To establish cartridge replacement frequency visit: 3M.com/ServiceLifeSoftware
Details
The 3M™ Multi-Gas/Vapour Cartridge/Filter 60926 is NIOSH approved against certain organic vapours, acid gasses and particulates. Use with 3M™ Half and Full Facepiece Respirators 6000, 7000 and FF-400 Series with bayonet filter holders.
3M™ Multi-Gas/Vapour Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapours, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are Immediately Dangerous to Life or Health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, oil and gas, and primary metals.
NIOSH approved against certain organic vapors, acid gases, ammonia methylamine, formaldehyde with P100 particulate filter
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
Wide range of applications reduces inventory needs
To establish cartridge replacement frequency visit: 3M.com/ServiceLifeSoftware
Use ultra fine hand pad for light cleaning, finishing of metal, plastic, composite and wood surfaces. For final sanding of primer-surfacer. Rinses clean, will not rust an can be used over and over again.
Auto Body Adhesives
