Additional information
Weight | 3 lbs |
---|---|
Dimensions | 5 × 5 × 5 in |
Brushable seam sealing of joints, before the installation of body components, covering strips, etc.
Sealing compound, based on synthetic rubber, temperature stable from -25 degrees C to 80 degrees C.
$29.63
In StockWeight | 3 lbs |
---|---|
Dimensions | 5 × 5 × 5 in |
SATA RPS (Rapid Preparation System) is the ideal cup system for shops focusing on perfect finishes and high profitability.
SATA RPS consists of 3 components only which means less handling efforts and thus, less expenditure of time.
No additional components are necessary. There is no other cup system with the same functions but with three components only!
The cleaning of the cup is not necessary with SATA RPS, thus saving time, cleaning agents and cost. Perfect colour match and perfect paint jobs reduce time and cost intensive rework. And the very few components additionally facilitate the entire work process – simplicity pays.
Contrary to other disposable cup systems, SATA RPS does not require any adapter in combination with SATA paint spray guns. Therefore, the spray gun can be easily and reliably cleaned. RPS adapters – For older SATA paint spray guns and spray guns of other manufactures spray gun adapters are available.
3M™ Vinyl Tape 471+, 06408, vinyl backing with a rubber adhesive, maintain color even when exposed to heavy abrasion, conformable, maintain color throughout not printed, dead stretch properties to provide straighter lines, clean removability. 1/2 inch x 36 yard. Purple.
MAXIM™ Fast Urethane Adhesive is a urethane repair material used for non-structural repairs on all plastics, fiberglass and SMC. It is an excellent urethane adhesive for bonding bumper brackets, backing strips, broken SMC/fiberglass pieces and other broken plastic pieces. It is the ideal product when a fast cure time is required (i.e. backside of a two-sided repair.)
ANDREAE Standard Filters are used in the exhaust of paint booths for over-spray collection.
The front V-shaped wall prevents over-spray bounce back and migration. The deeper V-shape of the back wall is the paint holding pocket.
The exhaust holes are misaligned to divert the paint laden airflow to the holding pocket, where the paint is captured, while maintaining a constant flow during the loading phase.
Lasts 3 x 5 times longer than poly, fiberglass or mesh media
Captures any wet solid or liquid particles
Standard & high efficiency options
V shape wall prevents over spray and bounce back migration
Easy to cut, replace and install