CARWORX 137.682
BEDROCK URETHANE COATING (PART A)
Area of Application:
Ideal as a truck bedliner, as well as on trailers, boats and R.V.’s.
Characteristic Features:
Adheres to metal, wood, plastics and concrete. Drive away in 3 hours. May be sprayed, rolled or brushed on.
*Click on MSDS link for Part A of Bedrock. Visit 137.682 Part B for access to Part B MSDS.
$94.72
In StockRECENTLY VIEWED
- PPS Cups System
SATA 1011973
0.9L RPS CUP WITH 125 MISCRON FILTER (40/BOX)SATA® RPS™ – The disposable cup system for mixing and painting
SATA RPS (Rapid Preparation System) is the ideal cup system for shops focusing on perfect finishes and high profitability.
One cup – four functions
- mix paint
- paint
- refill the paint
- store the paint
With only three components!
SATA RPS consists of 3 components only which means less handling efforts and thus, less expenditure of time.
- a cup
- a lid
- a sieve
No additional components are necessary. There is no other cup system with the same functions but with three components only!
Economical
The cleaning of the cup is not necessary with SATA RPS, thus saving time, cleaning agents and cost. Perfect colour match and perfect paint jobs reduce time and cost intensive rework. And the very few components additionally facilitate the entire work process – simplicity pays.
Adapters
Contrary to other disposable cup systems, SATA RPS does not require any adapter in combination with SATA paint spray guns. Therefore, the spray gun can be easily and reliably cleaned. RPS adapters – For older SATA paint spray guns and spray guns of other manufactures spray gun adapters are available.
(0 reviews) - Best Sellers
NORTON 31054
4″ Blaze Rapid Strip Discs TRNorton Blaze Rapid Strip TR+ Disc 4″ X 1/2″Norton Blaze Rapid Strip discs are constructed with thick, strong synthetic fibers and extra-coarse ceramic alumina abrasive. The open web construction of the disc provides fast cutting action with very little loading. Safer than wire bristle tools, Norton Blaze Rapid Strip aggressively removes rust and paint from drip moldings, pinch welds, door jambs, seams and other difficult to reach areas. The TR+ attachment system allows for rugged cleaning in tight areas.(0 reviews) - Mask Filters
3M 60926
MULTI-GAS/VAPOUR CARTRIDGE/FILTER, P100- NIOSH approved against certain organic vapors, acid gases, ammonia methylamine, formaldehyde with P100 particulate filter
- Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
- Wide range of applications reduces inventory needs
- To establish cartridge replacement frequency visit: 3M.com/ServiceLifeSoftware
DetailsThe 3M™ Multi-Gas/Vapour Cartridge/Filter 60926 is NIOSH approved against certain organic vapours, acid gasses and particulates. Use with 3M™ Half and Full Facepiece Respirators 6000, 7000 and FF-400 Series with bayonet filter holders.
3M™ Multi-Gas/Vapour Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapours, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are Immediately Dangerous to Life or Health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, oil and gas, and primary metals.
- NIOSH approved against certain organic vapors, acid gases, ammonia methylamine, formaldehyde with P100 particulate filter
- Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
- Wide range of applications reduces inventory needs
- To establish cartridge replacement frequency visit: 3M.com/ServiceLifeSoftware
Suggested Applications
- Painting
- Chemical clean-up
- Cleaning
- Pouring molten metal
- Hazardous waste handling
- Batch-charging
(0 reviews) - Auto Body Adhesives
DOMINION 4008
Flexible Bumper Repair KitXPST Flexible Epoxy is a two-component flexible modified epoxy designed for the repair of flexible plastics. XPST is formulated to work on all flexible plastics including the more common (TPUR, PUR, RIM). XPST is also compatible with the traditional “tough to bond” plastics (PP, TPO, TPE). This product is designed as an adhesive and as a filler to be used on the front and backsides of a repair. XPST can also be used over our Urethane Repair material (XSMAF). XPST is an outstanding flexible filler that is commonly used as a glaze coat over all types of plastics due to its easy sanding and featheredging characteristics. XPST bonds, fills, and sands with outstanding performance. This flexible adhesive/filler is used and approved by automotive OEMs such as GM, Toyota, VW and many others. The “Original Plastic Surgery” as used by the professionals.
(0 reviews) - 6" Stick-On Sandpaper
NORTON 31470
6″ P500B PSA A275 Chamag DiscsChampagne Magnum is sand paper technology at it’s best. It cuts faster, runs cooler, resists loading better and lasts far longer than any conventional sandpaper.
- Premium heat-treated grain extends life and gives a 30 – 50% faster cut rate
- Premium B-Weight latex paper backing improves performance, is more flexible and easier disc removal
- FEPA P-graded grain achieves a more consistent uniform scratch pattern
- Re-designed bond system optimizes grain adhesion and extends cut life
- Newest water based stearate No-Fil improves load resistance
- No pigment in No-Fil or bond eliminates the risk of color transfer and creates a much stronger bond
(0 reviews) - Car Polishing Pads and Compounds
PRESTA 131905
Ultra Cutting Cream- Removes coarse through fine sand scratches on cured and fresh paint
- Produces good gloss on all automotive coatings
- Restores gloss to marine coatings and gelcoats
- Contains no waxes or silicones
(0 reviews) - Abrasives
3M 02036
600 Wet 9X11Used in wet sanding, rough featheredging. Could be used for final sanding of plastic filler and putty. Most flexible backing with more consistent scratch pattern make this 3Ms best wet sanding product.
(0 reviews) - Abrasives
3M 07448
Gray Scotch-BriteUse ultra fine hand pad for light cleaning, finishing of metal, plastic, composite and wood surfaces. For final sanding of primer-surfacer. Rinses clean, will not rust an can be used over and over again.
(0 reviews)