CARWORX 137.682
BEDROCK URETHANE COATING (PART A)
Area of Application:
Ideal as a truck bedliner, as well as on trailers, boats and R.V.’s.
Characteristic Features:
Adheres to metal, wood, plastics and concrete. Drive away in 3 hours. May be sprayed, rolled or brushed on.
*Click on MSDS link for Part A of Bedrock. Visit 137.682 Part B for access to Part B MSDS.
$94.72
In StockRECENTLY VIEWED
- Car Polishing Pads and Compounds
3M 05711
9″ Wool Compounding Pad- Removes finishing abrasive sand scratches and other paint surface defects
- Double sided screw-on pads feature flexing action for reduced surface burn risk
- Untwisted wool yarn construction improves handling across large surface areas
- Blended or 100 percent wool abrasive delivers fast-cutting efficiency
(0 reviews) - PPS Cups System
3M 16312
PPS Mini Lids And LinersKit contains 50 disposable lids with 200 micron filters, 50 disposable liners, and 20 sealing plugs. The 200 micron filters are recommended for traditional solvent based paint or primer applications. Graduated measurement to 5 1/2 oz when used with generic mix ratio film insert (mix ratio inserts sold separately). Max. capacity of 6 fl oz. For use with part number 16115. Note: mix ratio film inserts are sold separately.
PPS™ is a complete painting system from 3M™ which produces cleaner jobs, saves on solvent usage and gun cleaning time and can improve operator efficiency by as much as 15%. Specifically designed adapters allow painters to use the PPS™ system with virtually any spray gun.
PPS™ replaces traditional mixing cups and filters and drastically reduces the amount of solvent required for gun cleaning. The liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. It is possible to clean your paint gun with as little as 3 ounces of solvent. With these disposable parts, shops can see a 70% savings in cleaning solvent use — meaning less operator exposure to solvents and reduction in VOCs.
Since PPS™ uses the same cup for mixing and spraying, there less risk of outside contamination, less time spend mixing and cleaning.(0 reviews) - Auto Body Filler Putty
USC 32035
RED GLAZING PUTTY 454gUSCRed Glazing Putty. A one component, fast drying glazing putty with an extra fine texture for filling pinholes, scratches and dimples on bare metal and hardened plastic fibers.
- Best under lacquer, acrylic and synthetic finishes
- Good adhesion
- Easy sanding
- Minimal shrinking
(0 reviews) - Aerosols
DOMINION 24008
Self Etching Primer – GreyOne Step is a high build, easy to use self etch primer that provides excellent adhesion for additional top coats, primers and sealers to metal. Compatible with all primer surfacers for spot repair and refinishing. Apply to steel, aluminum and most metals.
(0 reviews) - Wholesale Auto Body Masking Paper
3M 06539
18″ WHITE MASKING PAPER (750FT)- 2 PER CASE- Designed specifically for automotive aftermarket applications with 3M Masking Tapes and 3M Masking Equipment
- Flexible and pliable to cover irregular surfaces for higher productivity
- Tightly bonded construction makes for little or no lint or fibers
- Specially treated to resist bleed-through of solvents, urethanes, base and clear coats
- Heat resistant – a sheet can withstand a 400°F baking cycle for 30 minutes
Our 3M™ White Masking Paper is specially treated to resist heat from paint booths and penetration by paint solvents, urethanes, base coats and clear coats – ideal for collision repair. It is tightly bonded, virtually eliminating lint or fiber contamination that can occur using paper masking. And its thin but conformable construction makes it easy to handle, boosting shop efficiency.
Available in a range of sizesHow Our Masking Paper Improves Your Collision Repair
Designed specifically for automotive aftermarket applications, our 3M™ White Masking Paper (PDF, 34 Kb) helps you work more efficiently during a full range of masking jobs large and small. It is durable yet conformable and is available in a variety of sizes, making it easy to handle for protecting even irregular vehicle surfaces from paint overspray. This paper is specially treated to resist penetration by paint solvents, base coats, clear coats and urethanes, reducing rework caused by bleed-through. It also withstands heat — the masking paper can hold up during a bake cycle up to 400°F (204°C) for 30 minutes, making it suitable for use in paint booths.Designed Specifically for Automotive Aftermarket
This 3M™ White Masking Paper brings the science of 3M directly to auto body and collision repair, helping professionals work more efficiently and achieve their best results. Its design includes high tolerance to heat, resistance to chemical bleed-through and little or no loose lint or fibers — yet it still affords the easy, fast conformability of paper for truly effective masking.(0 reviews) - Car Polishing Pads and Compounds
CARWORX 120.211
Optimal Buffing Pads- OrangeBuffing foam pads with a center ring back and hex face pattern to help dissipate polish or compounds evenly, minimizing grabbing and reducing heat.
(0 reviews) - Wholesale Auto Body Masking Paper
3M 06537
6″ WHITE MASKING PAPER (750FT)- Designed specifically for automotive aftermarket applications with 3M Masking Tapes and 3M Masking Equipment
- Flexible and pliable to cover irregular surfaces for higher productivity
- Tightly bonded construction makes for little or no lint or fibers
- Specially treated to resist bleed-through of solvents, urethanes, base and clear coats
- Heat resistant – a sheet can withstand a 400°F baking cycle for 30 minutes
Our 3M™ White Masking Paper is specially treated to resist heat from paint booths and penetration by paint solvents, urethanes, base coats and clear coats – ideal for collision repair. It is tightly bonded, virtually eliminating lint or fiber contamination that can occur using paper masking. And its thin but conformable construction makes it easy to handle, boosting shop efficiency.
Available in a range of sizesHow Our Masking Paper Improves Your Collision Repair
Designed specifically for automotive aftermarket applications, our 3M™ White Masking Paper (PDF, 34 Kb) helps you work more efficiently during a full range of masking jobs large and small. It is durable yet conformable and is available in a variety of sizes, making it easy to handle for protecting even irregular vehicle surfaces from paint overspray. This paper is specially treated to resist penetration by paint solvents, base coats, clear coats and urethanes, reducing rework caused by bleed-through. It also withstands heat — the masking paper can hold up during a bake cycle up to 400°F (204°C) for 30 minutes, making it suitable for use in paint booths.Designed Specifically for Automotive Aftermarket
This 3M™ White Masking Paper brings the science of 3M directly to auto body and collision repair, helping professionals work more efficiently and achieve their best results. Its design includes high tolerance to heat, resistance to chemical bleed-through and little or no loose lint or fibers — yet it still affords the easy, fast conformability of paper for truly effective masking.
(0 reviews)