DURAFIL GP-710- Polyester Glazing Putty (1.43LB)
GLAZE-FIL GP710 Polyester Glazing Putty is a premium
lightweight catalyzed glazing putty. It’s luxurious, rich, creamy
consistency applies ever so smoothly providing a fast cure
with effortless sanding properties. GP710 has been formulated
with premium ingredients to provide you with the ultimate in
performance. It’s stain resistant properties make it ideal for
use under basecoat/clearcoat repairs. GP710’s excellent feather edging and filling properties make it ideal for filling minor body imperfections, defects, and scratches up to 3 mm
(1/8”) in depth. It can be sanded in approximately 15 minutes at
25°C / 77° F without gumming your sandpaper and results in a silky smooth, luxurious finish everyone!
|Dimensions||17.78 × 17.78 × 22.86 in|
- Better flow and consistency for a better end result
- Quarter-turn lid locking system stays cleaner, locks faster, with fewer assembly steps
- Easy to use
- Cup windows allow you to hold the liner for cleaner, easier lid removal, and to check paint levels with ease
CLEAN-FIL CF-125 is a Low VOC Silicone & Wax Remover
formulated to quickly and easily remove silicones, oil, waxes,
grease, overspray, adhesives, engine oil, fingerprints, and other
contaminants from surfaces to be refinished. CF-125 can be
applied to metal, undercoats, plastics, fiberglass, and cured or
dried automotive painted finishes. CF-125 is packaged
ready-to-use and has been designed to be used before sanding,
taping, priming, and sealing and should also be applied to the
repair surface as a final wash prior to applying a topcoat.
*Not available for shipping*
3M™ Automotive Acrylic Plus Attachment Tape 06383 is a .045-inch thick, medium-density, black acrylic foam tape with high performance acrylic adhesives on both sides and a red release liner.
Acrylic Plus Attachment Tapes are OEM approved and are stronger, higher performing, high stress handling products than other automotive attachment tapes. Typical applications for 06383 would include body side moldings, rocker panel moldings, claddings, wheel flares, bumper trim and other exterior and interior automotive trim components.
Gerson tack cloths are approved by leading Auto, Marine, Aerospace and Electronics manufacturers. We offer a complete assortment of cotton and synthetic tack cloths for high, medium and low-tack applications. Gerson is a leading, prime manufacturer of Tack Cloths for critical surface preparation. A complete range of substrates are available, from lint-free knit polyester to nonwovens to 100% cotton gauze.
- Dry tack formulation
- Completely removes surface particles without harmful residues
- Wax and Silicone free
- Compatible with all paints
Use these 320+ grade sheets for rough featheredging. Could be used for final sanding of plastic filler and putty. Built with patented 3M Cubitron™ II precision shaped abrasive grains, these sheet roll abrasives cut faster and last longer than other sandpapers.
These sheet rolls feature our unique kiss-cut scorring technology which enables users to be cleanly and easily converted into multiple sheet-lengths. For maximum dust removal, 3M has added hundreds of small holes which have been purposely arranged in a chevron formation.
The triangular-shaped ceramic grains of Cubitron™ II are electrostatically oriented to form sharp peaks, each acting like an individual cutting tool that slices through paint and body filler, wearing evenly, and providing long life.
70 mm x 12 m