DURAFIL R-122- Fast-Fil Medium Reducer (Gallon)
FAST-FIL R-121 / MEDIUM-FIL R-122 / SLOW-FIL R-123 are
Low VOC, 250 g/L or less, Reducers designed to be used in all
solvent based IIK urethane primers, urethane, acrylic enamel,
and air dry enamel paint systems, basecoat paints, and
clearcoats. These Reducers will provide you with the optimal
spray viscosity, and flow properties necessary to extract the
optimal performance from any solvent based system. You have
a choice of three speeds of dry Reducers from Fast to Slow dry
R-121/R-122/R-123 to meet your speed of dry requirements.
Select the appropriate speed of dry Reducer according to
temperature and size of the repair surface to extract the optimum
performance from any two component, Low VOC solventborne
|Dimensions||17.78 × 12.7 × 25.4 in|
- Spreads like a short strand yet bridges holes like a long strand
- Non-sagging even on vertical surfaces – spreads, adheres, and finishes like a polyester filler
- Forms a hard, durable surface that is still smooth and very easy to sand
- Can be finished with putty or glaze or directly primed
- It comes collapsed in a box containing a 36 inch high 30 feet long filter.
- Lasts 3 to 5 times longer than fiberglass filters.
- Paint particles are captured and retained outside the air stream in the holding pockets.
- Captures 98.1% of Bake Enamel High Solids and holds 4 lbs. per sq. ft. of overspray.
- COMPLIANT WITH 40 CFR PART 63 NESHAP
American® brand AM is the cost-effective solution designed for clean and easy removal. UV resistance for 3 days. AM tape has a controlled unwind, is good for cornering and is resistant to temperatures up to 225ºF (107ºC) for 30 minutes. Excellent adhesion to backing when layered. Stain resistant; resists bleed-through and resists paint flaking. Superior for wet sanding applications
Uniform pressure thanks to foam backing, adaptable on shaped surfaces, fine sanding of round edges, fine sanding on flat areas, fine sanding of primer, paint and lacquers, sanding for blending uses,fine sanding before polishingm matt sanding. Can wet sand or dry sand.