DURAFIL R-123.5- Fast-Fil Slow Reducer (5-Gallon)
FAST-FIL R-121 / MEDIUM-FIL R-122 / SLOW-FIL R-123 are
Low VOC, 250 g/L or less, Reducers designed to be used in all
solvent based IIK urethane primers, urethane, acrylic enamel,
and air dry enamel paint systems, basecoat paints, and
clearcoats. These Reducers will provide you with the optimal
spray viscosity, and flow properties necessary to extract the
optimal performance from any solvent based system. You have
a choice of three speeds of dry Reducers from Fast to Slow dry
R-121/R-122/R-123 to meet your speed of dry requirements.
Select the appropriate speed of dry Reducer according to
temperature and size of the repair surface to extract the optimum
performance from any two component, Low VOC solventborne
*Not available for shipping*
MRS-771 2.1 V.O.C. Acrylic Lacquer Primer Surfacer-Grey is a premium acrylic lacquer primer surfacer formulated for the most stringent V.O.C. regulations. This primer surfacer must be reduced with the proper Zero V.O.C. reducer to be compliant. MRS-771 has excellent adhesion with superior filling and sanding properties. For optimum performance a compliant self-etching primer or epoxy primer should be applied to bare substrate before applying MRS-771. Packaged in gallons (4 gallons/case)
Uniform pressure thanks to foam backing, adaptable on shaped surfaces, fine sanding of round edges, fine sanding on flat areas, fine sanding of primer, paint and lacquers, sanding for blending uses,fine sanding before polishingm matt sanding. Can wet sand or dry sand.
Norton SpeedGrip Urethane Structural Adhesives are a versatile and fast two part urethane system for bonding and repairing steel, aluminum, flexible, semi-rigid and rigid plastic and fiberglass. All products perform the same on all materials. Just select the working time that best fits your needs
Champagne Magnum is sand paper technology at it’s best. It cuts faster, runs cooler, resists loading better and lasts far longer than any conventional sandpaper.
- Premium heat-treated grain extends life and gives a 30 – 50% faster cut rate
- Premium B-Weight latex paper backing improves performance, is more flexible and easier disc removal
- FEPA P-graded grain achieves a more consistent uniform scratch pattern
- Re-designed bond system optimizes grain adhesion and extends cut life
- Newest water based stearate No-Fil improves load resistance
- No pigment in No-Fil or bond eliminates the risk of color transfer and creates a much stronger bond