your trusted source for automotive paint and refinishing
Shopping Cart$33.76
1
PROUDLY CANADIAN
FREE GROUND SHIPPING ON ORDERS OVER $450
View cart “3M 52P713M Dual Cartridge Respirator, P95 Medium (7192)” has been added to your cart.
Sale!
NORTON 6418 Epoxy Panel Bonder- 30 Min
Epoxy Panel-Bonding Adhesive Two-part epoxy adhesive designed to bond SMC, FRP, fiberglass, steel and aluminum auto parts and body panels to each other and to metal frames (no primer required). • Minimal odor • Glass beads for proper spacing • Easy to sand formulation • Paintable • Seals and bonds in one step
Large panel adhesive is a strong, multi-use, glass-sphere filled epoxy that provides a superior bond. Use for bonding metal, fiberglass, SMC and aluminum. Glass-spheres assist you in maintaining proper bond line thickness. Work Time: 75 – 85 minutes. Unclamp Time: 4 1⁄2 hrs
Two-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass). The primary use is to replace quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins. Use with Premium Manual Applicator 200ml 08117, 3M Static Mixing Nozzle 08193.
This product is also sold in our 400 ml size as SMC/FRP Repair – 90, 08274
SATA® RPS™ – The disposable cup system for mixing and painting
SATA RPS (Rapid Preparation System) is the ideal cup system for shops focusing on perfect finishes and high profitability.
One cup – four functions
mix paint
paint
refill the paint
store the paint
With only three components!
SATA RPS consists of 3 components only which means less handling efforts and thus, less expenditure of time.
a cup
a lid
a sieve
No additional components are necessary. There is no other cup system with the same functions but with three components only!
Economical
The cleaning of the cup is not necessary with SATA RPS, thus saving time, cleaning agents and cost. Perfect colour match and perfect paint jobs reduce time and cost intensive rework. And the very few components additionally facilitate the entire work process – simplicity pays.
Adapters
Contrary to other disposable cup systems, SATA RPS does not require any adapter in combination with SATA paint spray guns. Therefore, the spray gun can be easily and reliably cleaned. RPS adapters – For older SATA paint spray guns and spray guns of other manufactures spray gun adapters are available.
Norton Blaze Rapid Strip discs are constructed with thick, strong synthetic fibers and extra-coarse ceramic alumina abrasive. The open web construction of the disc provides fast cutting action with very little loading. Safer than wire bristle tools, Norton Blaze Rapid Strip aggressively removes rust and paint from drip moldings, pinch welds, door jambs, seams and other difficult to reach areas. The TR+ attachment system allows for rugged cleaning in tight areas.
NIOSH approved against certain organic vapors, acid gases, ammonia methylamine, formaldehyde with P100 particulate filter
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
Wide range of applications reduces inventory needs
To establish cartridge replacement frequency visit: 3M.com/ServiceLifeSoftware
Details
The 3M™ Multi-Gas/Vapour Cartridge/Filter 60926 is NIOSH approved against certain organic vapours, acid gasses and particulates. Use with 3M™ Half and Full Facepiece Respirators 6000, 7000 and FF-400 Series with bayonet filter holders.
3M™ Multi-Gas/Vapour Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapours, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are Immediately Dangerous to Life or Health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, oil and gas, and primary metals.
NIOSH approved against certain organic vapors, acid gases, ammonia methylamine, formaldehyde with P100 particulate filter
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
Wide range of applications reduces inventory needs
To establish cartridge replacement frequency visit: 3M.com/ServiceLifeSoftware
Champagne Magnum is sand paper technology at it’s best. It cuts faster, runs cooler, resists loading better and lasts far longer than any conventional sandpaper.
Premium heat-treated grain extends life and gives a 30 – 50% faster cut rate
Premium B-Weight latex paper backing improves performance, is more flexible and easier disc removal
FEPA P-graded grain achieves a more consistent uniform scratch pattern
Re-designed bond system optimizes grain adhesion and extends cut life
Newest water based stearate No-Fil improves load resistance
No pigment in No-Fil or bond eliminates the risk of color transfer and creates a much stronger bond
XPST Flexible Epoxy is a two-component flexible modified epoxy designed for the repair of flexible plastics. XPST is formulated to work on all flexible plastics including the more common (TPUR, PUR, RIM). XPST is also compatible with the traditional “tough to bond” plastics (PP, TPO, TPE). This product is designed as an adhesive and as a filler to be used on the front and backsides of a repair. XPST can also be used over our Urethane Repair material (XSMAF). XPST is an outstanding flexible filler that is commonly used as a glaze coat over all types of plastics due to its easy sanding and featheredging characteristics. XPST bonds, fills, and sands with outstanding performance. This flexible adhesive/filler is used and approved by automotive OEMs such as GM, Toyota, VW and many others. The “Original Plastic Surgery” as used by the professionals.
The 3M™ Organic Vapour/Acid Gas Cartridge/Filter 60923 is NIOSH approved against certain organic vapours, acid gasses and particulates. Use with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.
3M™ Organic Vapour/Acid Gas Cartridge/Filter 60923 P100 helps provide protection against certain organic vapours, acid gasses and particulates in a variety of environments. The cartridge/filter combination may be used for respiratory protection from certain organic vapours, chlorine, hydrogen chloride, sulfur dioxide, hydrogen sulfide, hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepieces. This cartridge/filter is not for use in environments that are Immediately Dangerous to Life or Health (IDLH). Recommended applications for the cartridge/filter include chemical manufacturing, laboratories, petrochemical, and pharmaceuticals. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge/filter selection works for many different applications. This cartridge/filter is commonly used in the following industries: chemicals, general manufacturing, and pharmaceuticals.
NIOSH approved against certain organic vapors, acid gases with P100 particulate filter
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
Wide range of applications reduces inventory needs
To establish cartridge replacement frequency visit: 3M.com/ServiceLifeSoftware
Auto Body Adhesives
