your trusted source for automotive paint and refinishing
Shopping Cart$32.89
1
PROUDLY CANADIAN
FREE GROUND SHIPPING ON ORDERS OVER $450
View cart “CARWORX 134.460Soft Worx Putty (1.8KG)” has been added to your cart.
Sale!
SATA 1011973 0.9L RPS CUP WITH 125 MISCRON FILTER (40/BOX)
SATA® RPS™ – The disposable cup system for mixing and painting
SATA RPS (Rapid Preparation System) is the ideal cup system for shops focusing on perfect finishes and high profitability.
One cup – four functions
mix paint
paint
refill the paint
store the paint
With only three components!
SATA RPS consists of 3 components only which means less handling efforts and thus, less expenditure of time.
a cup
a lid
a sieve
No additional components are necessary. There is no other cup system with the same functions but with three components only!
Economical
The cleaning of the cup is not necessary with SATA RPS, thus saving time, cleaning agents and cost. Perfect colour match and perfect paint jobs reduce time and cost intensive rework. And the very few components additionally facilitate the entire work process – simplicity pays.
Adapters
Contrary to other disposable cup systems, SATA RPS does not require any adapter in combination with SATA paint spray guns. Therefore, the spray gun can be easily and reliably cleaned. RPS adapters – For older SATA paint spray guns and spray guns of other manufactures spray gun adapters are available.
Kit contains 50 disposable lids with 200 micron filters, 50 disposable liners, and 20 sealing plugs. The 200 micron filters are recommended for traditional solvent based paint or primer applications. Holds 22 ounces (650 mL).
PPS™ is a complete painting system from 3M™ which produces cleaner jobs, saves on solvent usage and gun cleaning time and can improve operator efficiency by as much as 15%. Specifically designed adapters allow painters to use the PPS™ system with virtually any spray gun.
PPS™ replaces traditional mixing cups and filters and drastically reduces the amount of solvent required for gun cleaning. The liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. It is possible to clean your paint gun with as little as 3 ounces of solvent. With these disposable parts, shops can see a 70% savings in cleaning solvent use — meaning less operator exposure to solvents and reduction in VOCs.
Since PPS™ uses the same cup for mixing and spraying, there less risk of outside contamination, less time spend mixing and cleaning.
With PPS™ your spray gun functions at any angle Many painters mix more paint than they need to reduce the chance of starving the gun. PPS™ allows painters to spray at any angle without starving the paint gun.
Kit contains 50 disposable lids with 200 micron filters, 50 disposable liners, and 20 sealing plugs. The 200 micron filters are recommended for traditional solvent based paint or primer applications. For use with part number 16001.
3M™ PPS™ Series 2.0 Spray Cup System Kit, 26325 Large (28 fl oz, 850 mL), 125u Micron Filter, 1 kit per case3M™ PPS™ Series 2.0 Spray Cup System is our next generation, highest-performing 3M™ Paint Preparation System (PPS™) on the disposable spray cup market. Kit contains 50 disposable lids with 200 micron or 125 micron filters, 50 disposable liners, 1 reusable hard shell cup and 32 sealing plugs.
Characteristics : HVLP gravity spray gun for high quality finishes. Specifically designed for car refinishing. The air cap, needle and nozzle are all made of stainless steel and are suitable for use with the latest waterborne paints.
Designed for non-critical applications including bundling, sealing, and general paint masking. Our proprietary adhesive sticks easily, allowing fast application and with less lifting and curling. The crepe paper backing improves conformability, makes tearing easier and reduces application time. Standard natural colored crepe paper automotive paint masking tape.
Rage® Xtreme™ is the world’s first truly pinhole-free premium body filler. This technically-advanced, unique formula is self-leveling for easy spreading, reducing sanding time to remove heavy texture. Easily sands with 80 grit sandpaper, eliminating the need for coarse grits that can cause sand scratch swelling. Contains Evercoat® ZNX-7® which quickly provides superior adhesion to galvanized steel and aluminum much sooner in the repair.
ZNX-7® insures faster and easier sanding without risk of pulling back the featheredge and having to re-apply filler. Formulated to resist penetration of new and more aggressive HAP*-compliant solvents and waterborne coatings, Xtreme™ improves the quality of the finish, reducing the chance for repair mapping, comebacks and redoes. This makes Xtreme™ perfect for next generation basecoat/clearcoat systems. Blue cream hardener included.(*Hazardous Air Pollutants)
Replacement lids which fit both sizes: 3M™ PPS™ Standard (PN 16300) and 3M™ PPS™ Large (PN 16324)
3M™ PPS™ Standard Disposable Lids are replacement lids with 125 micron filters, which fit both the 3M™ PPS™ Standard Kit, PN16300, and 3M™ PPS™ Large Kit, PN16324.
Suggested Applications
Designed to fit both the 3M™ PPS™ Standard Kit, PN16300, and 3M™ PPS™ Large Kit, PN16324
The 125 micron filters are often recommended for waterborne paint materials
Taff-Guard two layer intake panels are constructed using two synthetic layers of media sealed over a metal wire frame. The first layer, dry and white, acts as a pre-filter to remove the medium and large particles. The second layer, green with an adhesive, removes and retains the smaller particles.
Typically, this intake filter is installed in the paint booth doors and/or ceilings. However, these paint booth filters can be used in any standard HVAC application as well.
PRODUCT OVERVIEW:
100% synthetic material with tack layer to trap dirt particles
Low resistance to air flow which results in minimal energy costs
PPS Cups System
Reviews
There are no reviews yet.