Carworx Kombi Filler is a one component nitro cellulose stopper for filling small imperfections like scratches, pinholes and shallow dents. Due to its smooth consistency, Kombi Filler can be applied in very thin coats. After sanding, a porous free surface is provided which can be painted without the need of a primer.
Pronto Kombi Spot Putty. Little scratches. Tiny pinholes. You’re ready to prime. “Uh oh! Somebody grab the PRONTO!” This one-component, air dry kombi putty is ideal for last minute minor imperfections.
- Spreads easy and dries quickly
- Small enough to fit in a pocket
- European style 1K air dry kombi putty
- High solids for excellent fill
- Minimal shrinking
- Great sanding
- 5 ounce tube
COLOR: Olive drab (as packaged)
MIX: Ready to use
SUBSTRATE: Metal. Aluminum. Galvanized and zinc coated steel. 1K and 2K primer. Aged, sanded OEM topcoats.
SUGGESTED USE: Use for last minute repairs and minor imperfections, pinholes, chips and scratches.
TOP COAT: Primer, primer surfacer, sealer, basecoat and single stage.
Dolphin Glaze is a premium, technically advanced finishing glaze designed to eliminate pinholes and surface imperfections prior to painting. Its self-leveling formulation gives a smooth ultra fine finish which requires minimal sanding.
- Pinhole resistant
- Excellent adhesion
Substrates: Direct to metal, prepared OEM paint surfaces, aluminum, galvanized, SMC, fiberglass, lightly abraded E coat, most plastics
GLAZE-FIL GP710 Polyester Glazing Putty is a premium
lightweight catalyzed glazing putty. It’s luxurious, rich, creamy
consistency applies ever so smoothly providing a fast cure
with effortless sanding properties. GP710 has been formulated
with premium ingredients to provide you with the ultimate in
performance. It’s stain resistant properties make it ideal for
use under basecoat/clearcoat repairs. GP710’s excellent feather edging and filling properties make it ideal for filling minor body imperfections, defects, and scratches up to 3 mm
(1/8”) in depth. It can be sanded in approximately 15 minutes at
25°C / 77° F without gumming your sandpaper and results in a silky smooth, luxurious finish everyone!
Our #1 selling, high-quality, clog-free, lighweight body filler is a great value with its smooth spreading, easy sanding features. Non-clog formula adds greater value in sandpaper savings. Blue cream hardener included.
LUX-FIL P550 Polyester Finishing Putty is a premium lightweight catalyzed finishing putty. It has been formulated with premium ingredients to provide you with the ultimate in performance. It’s luxurious, rich, creamy consistency applies ever so smoothly providing a fast cure with effortless sanding properties. It’s stain resistant properties make it ideal for use under basecoat/clearcoat repairs. P550’s excellent feather edging and filling properties make it ideal for filling minor body imperfections, defects, and scratches up to 3 mm (1/8″) in depth. It can be sanded in approximately 15 minutes at 25°C / 77° F without gumming your sandpaper and results in a silky smooth, luxurious finish everytime!
Area of Application:
Especially easy to sand, two-component polyester filling putty. To be applied in order to equalize or close possible pin holes, small irregularities, small paint damages or scratches on the body of cars, vehicles or machines. Recommended also to be used as a putty and dowel setting material as well as an adhesive for iron, wood, stone and porcelain.
– adhesive on iron, steel, aluminum, galvanized substrates and glass fiber
For filling imperfections and shallow dents, provides a smooth non-porous surface.
Due to its thixotropic properties, it can fill deeper dents, and insures a low abrasive consumption, very easy sanding.
Aluminum filled body repair filler for metal surfaces. Has excellent corrosion resistance and superior adhesion to galvanized steel and aluminum. Will not sag. Best known as the “nearest thing to lead.” Moisture proof. Rustproof. Easily sands to a fine featheredge. Metal-2-Metal™ liquid reactor included.
Formulated for fast work, dries rapidely and is easy to sand. It’s creamy texture and good spreading allows easy repair of large areas. It may be applied on steel, electrozinc-coated, galvanized, aluminum or polyester surfaces.