Mask Filters
Showing 19–28 of 28 results
- Mask Filters
3M 60921
ORGANIC VAPOR CARTRIDGE/FILTER, P100The 3M™ Organic Vapour Cartridge/Filter 60921 is NIOSH approved against certain organic vapours and particulates. Use with 3M™ Half and Full Facepiece, 6000, 3M™ Half and Full Facepiece, 7000, and 3M™ Half and Full Facepiece, FF-400 Series with bayonet filter holders.
3M™ Organic Vapour Cartridge/Filter 60921 P100 helps provide protection against certain organic vapours and particulates in a variety of environments. The cartridge/filter combination may be used for respiratory protection from certain organic vapours and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepieces. This cartridge/filter is not for use in environments that are Immediately Dangerous to Life or Health (IDLH). Recommended applications for the cartridge/filter include chemical clean-up, chemical compounding, chemical transfer, laboratories, and pesticide application. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: agriculture, chemicals, mining, oil and gas, pharmaceuticals, and primary metals.
- NIOSH approved against certain organic vapours with P100 particulate filter
- Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
- To establish cartridge replacement frequency visit: 3M.com/ServiceLifeSoftware
Suggested Applications
- Change-overs
- Chemical dispensing
- Cleaning
- Painting
- Seal Coating
(0 reviews) - Mask Filters
3M 60926
MULTI-GAS/VAPOUR CARTRIDGE/FILTER, P100- NIOSH approved against certain organic vapors, acid gases, ammonia methylamine, formaldehyde with P100 particulate filter
- Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
- Wide range of applications reduces inventory needs
- To establish cartridge replacement frequency visit: 3M.com/ServiceLifeSoftware
DetailsThe 3M™ Multi-Gas/Vapour Cartridge/Filter 60926 is NIOSH approved against certain organic vapours, acid gasses and particulates. Use with 3M™ Half and Full Facepiece Respirators 6000, 7000 and FF-400 Series with bayonet filter holders.
3M™ Multi-Gas/Vapour Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapours, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are Immediately Dangerous to Life or Health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, oil and gas, and primary metals.
- NIOSH approved against certain organic vapors, acid gases, ammonia methylamine, formaldehyde with P100 particulate filter
- Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
- Wide range of applications reduces inventory needs
- To establish cartridge replacement frequency visit: 3M.com/ServiceLifeSoftware
Suggested Applications
- Painting
- Chemical clean-up
- Cleaning
- Pouring molten metal
- Hazardous waste handling
- Batch-charging
(0 reviews) - Mask Filters
3M 60923
ORGANIC VAPOUR/ACID GAS CARTRIDGE/FILTERThe 3M™ Organic Vapour/Acid Gas Cartridge/Filter 60923 is NIOSH approved against certain organic vapours, acid gasses and particulates. Use with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.
3M™ Organic Vapour/Acid Gas Cartridge/Filter 60923 P100 helps provide protection against certain organic vapours, acid gasses and particulates in a variety of environments. The cartridge/filter combination may be used for respiratory protection from certain organic vapours, chlorine, hydrogen chloride, sulfur dioxide, hydrogen sulfide, hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepieces. This cartridge/filter is not for use in environments that are Immediately Dangerous to Life or Health (IDLH). Recommended applications for the cartridge/filter include chemical manufacturing, laboratories, petrochemical, and pharmaceuticals. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge/filter selection works for many different applications. This cartridge/filter is commonly used in the following industries: chemicals, general manufacturing, and pharmaceuticals.
- NIOSH approved against certain organic vapors, acid gases with P100 particulate filter
- Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
- Wide range of applications reduces inventory needs
- To establish cartridge replacement frequency visit: 3M.com/ServiceLifeSoftware
Suggested Applications
- Painting
- Chemical manufacturing
- Seal coatings
- Pesticide application
- Cleaning and maintenance
- Aluminium reduction
(0 reviews) - Mask Filters
3M 2297
PARTICULATE FILTER 2297, P100The 3M™ Advanced Particulate Filter 2297 is designed to make breathing easier while lasting longer. NIOSH approved for environments containing certain oil and non-oil based particles. 3M recommended for relief against nuisance level organic vapours and for ozone protection up to 10X OSHA PEL.
Use with 3M™ Respirators 5000 Series or 3M™ Cartridge 6000 Series with 3M™ Adapter 502, or 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders. When properly fitted, use in a variety of applications including welding, brazing, torch cutting, metal pouring, soldering, and exposure to lead, asbestos, cadmium, arsenic, and MDA for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half Facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Also offers nuisance level relief from organic vapours that are below the PEL. Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government occupational exposure limits, whichever is lower. The filter is both flame and water resistant. Not NIOSH certified for use against ozone. Do not use for respiratory protection against organic vapours or in environments that are Immediately Dangerous to Life or Health (IDLH).
- NIOSH approved for environments containing certain oil and non-oil-based particles with nuisance organic vapour relief
- Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
- Easier breathing
- Long lasting
Suggested Applications
- Nuisance level organic vapour relief
- Welding
- Brazing
- Soldering
- Metal pouring
- Torch cutting
- Exposure to lead, asbestos, cadmium, arsenic, and MDA
(0 reviews) - Mask Filters
3M 2091
PARTICULATE FILTER, 2091, P100The 3M™ Particulate Filter 2091 is NIOSH approved for environments containing certain oil and non-oil based particles.
3M™ Particulate Filter 2091, P100 helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. This filter helps protect against a wide range of oil and non-oil based particulate contaminants. 3M’s Advanced Electret Media (AEM) provides a comfortable lightweight, easy-breathing combination. The 3M™ Particulate Filter 2091 is commonly used for welding, brazing, torch cutting, metal pouring and soldering. The filter is both flame and water resistant. Industries where this filter is commonly used include agriculture, construction, general manufacturing, pharmaceuticals and primary metals.
- NIOSH approved for environments containing certain oil and non-oil-based particles
- Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
- Advanced Electret Media (AEM) provides lightweight, easy breathing comfort
- Advanced Electret Media (AEM) provides lightweight, easy breathing comfort
Suggested Applications
- Protection against many oil and non-oil based particulate contaminants
- Welding
- Brazing
- Torch cutting
- Metal pouring
- Soldering
- Exposure to lead, asbestos, cadmium, arsenic, and MDA
(0 reviews) - Mask Filters
3M 2071
PARTICULATE FILTER 2071, P95The 3M™ Particulate Filter 2071 is NIOSH approved for environments containing certain oil and non-oil based particles.
Use with 3M™ Respirators, 5000 Series or 3M™ Cartridge, 6000 Series with 3M™ Adapter, 502, or 3M™ Half and Full Facepiece, 6000, 3M™ Half and Full Facepiece, 7000, and 3M™ Half and Full Facepiece, FF-400 Series with bayonet filter holders. When properly fitted, use in a variety of applications such as grinding, sanding and welding for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. The filter is both flame and water resistant. Do not use in environments that are immediately dangerous to life or health (IDLH). 3M offers a wide array of options when it comes to cartridges and filters. 3M™ Respirator Cartridges and Filters offer easy installation to your Powered Air Purifying Respirators (PAPR) or Supplied Air Respirator assembly making them a great choice for fast paced industrial environments.
- NIOSH approved for environments containing certain oil and non-oil-based particles
- Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
- Bayonet compatibility allows use with many 3M™ Half and Full Facepiece designs
- Advanced Electret Media (AEM) provides lightweight, easy breathing comfort
Suggested Applications
- Grinding
- Sanding
- Welding
(0 reviews) - Mask Filters
3M 5N11
PARTICULATE FILTER, 5N11, N95The 3M™ Particulate Filter 5N11 is NIOSH approved for environments containing certain non-oil based particles. Use with 3M™ Respirators 5000 Series or 3M™ Cartridges 6000 Series or 3M™ Filter Adapter 603, and 3M™ Filter Retainer 501.
3M™ Particulate Filter 5N11, N95 helps provide respiratory protection in environments containing certain non-oil based particles. When properly fitted, use with appropriate cartridges for various applications including spray painting, petrochemical and chemical manufacturing, and pesticide spraying for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. The filter protects against 1) solids such as those from processing minerals, coal, iron ore, cotton, flour, and certain other substances; 2) liquids or non-oil based particles from sprays that do not emit harmful vapours; and 3) metal fumes produced from welding, brazing, cutting, and other operations involving heating of metals.
- NIOSH approved for environments containing certain non-oil-based particles
- Use on top of 3M™ Filter Holder, 603 and 3M™ Retainer, 501 to reduce particulate exposure
- Replaceable particle filter for cost savings
- Advanced Electret Media (AEM) provides lightweight, easy breathing comfort
Suggested Applications
- Spray painting
- Chemical manufacturing
- Pesticide application
- Petrochemical
- General Manufacturing
(0 reviews) - Mask Filters
3M 07502
HALF FACEPIECE REUSABLE RESPIRATOR MEDIUM- Advanced silicone material for increased comfort and greater durability
- Proprietary 3M™ CoolFlow™ Valve helps make breathing easier and can offer cooler and drier comfort
- Dual-mode head harness that adjusts easily so users can wear the respirator in either standard or drop-down mode
- Solid exhalation valve cover
(0 reviews) - Mask Filters
3M 06800
FULL FACEPIECE REUSABLE REPIRATPR MEDIUM- Unique centre adapter to direct exhaled breath and moisture downward, helps reduce debris from depositing in the valve, and allows for quick and easy cleaning
- Large lens for wide field of view and excellent visibility
- 3M™ Cool Flow™ Valve for cooler, drier comfort
- Lightweight, balanced design
(0 reviews)