Additional information
Weight | 3.48 lbs |
---|---|
Dimensions | 16 × 14 × 6 in |
Kit contains 25 disposable lids with 125 micron filters – full diameter – , 25 disposable liners, and 10 sealing plugs. The 125 micron filters are recommended for water borne paint or primer applications. Graduated measurement to 28 oz/840 mL when used with mix ratio film insert (mix ratio inserts sold separately). For use with parts 16023 and 16124.
$157.25
In StockWeight | 3.48 lbs |
---|---|
Dimensions | 16 × 14 × 6 in |
Use ultra fine hand pad for light cleaning, finishing of metal, plastic, composite and wood surfaces. For final sanding of primer-surfacer. Rinses clean, will not rust an can be used over and over again.
Water-soluble cleaners strip away waxes, sealers, road film and dirt while super fine abrasives create a consistent surface profile.
This profiling helps coatings spread flatter and bond more securely to the treated surface. Use Scuff Stuff to prepare blend and hard-to-reach areas, such as around door locks and under seals and door jambs. It is ideal for cleaning and abraiding urethane bumpers. Scuff Stuff rinses off easily and completely with water.
Champagne Magnum is sand paper technology at it’s best. It cuts faster, runs cooler, resists loading better and lasts far longer than any conventional sandpaper.
SATA® RPS™ – The disposable cup system for mixing and painting
SATA RPS (Rapid Preparation System) is the ideal cup system for shops focusing on perfect finishes and high profitability.
One cup – four functions
With only three components!
SATA RPS consists of 3 components only which means less handling efforts and thus, less expenditure of time.
No additional components are necessary. There is no other cup system with the same functions but with three components only!
Economical
The cleaning of the cup is not necessary with SATA RPS, thus saving time, cleaning agents and cost. Perfect colour match and perfect paint jobs reduce time and cost intensive rework. And the very few components additionally facilitate the entire work process – simplicity pays.
Adapters
Contrary to other disposable cup systems, SATA RPS does not require any adapter in combination with SATA paint spray guns. Therefore, the spray gun can be easily and reliably cleaned. RPS adapters – For older SATA paint spray guns and spray guns of other manufactures spray gun adapters are available.
Evercoat’s® easiest sanding body filler. The unsurpassed sanding qualities are attributed to Hattonite™, a unique ingredient which reduces heat and friction created by aggressive sanding. Rage Gold also contains ZNX-7® for adhesion to galvanized steel and aluminum. Plus, it’s stain resistant for use with basecoat/clearcoat paints. Part of the MetalWorks® System. Blue cream hardener included.
Two-part urethane used to bond backup strips to SMC and FRP (traditional fiberglass). Fast work time for larger backup strips and patch applications. Longer work time that 08270. Work time = 3 minutes. Clamp time = 10 minutes. Cure time = 30 minutes