Additional information
Weight | 1.13 lbs |
---|---|
Dimensions | 5 × 5 × 2 in |
$58.33
In StockWeight | 1.13 lbs |
---|---|
Dimensions | 5 × 5 × 2 in |
Single Sided Black Foam Polishing Pad used to remove compound swirl marks and fine paint surface defects. Flat back design. For use with 3M™ machine polishes and 3M™ Hookit™ back up pads, 05717 or 05718. Proven performer.
Champagne Magnum is sand paper technology at it’s best. It cuts faster, runs cooler, resists loading better and lasts far longer than any conventional sandpaper.
3M™ Automotive Acrylic Plus Attachment Tape 06382 is a .045-inch thick, medium-density, black acrylic foam tape with high performance acrylic adhesives on both sides and a red release liner.
Acrylic Plus Attachment Tapes are OEM approved and are stronger, higher performing, high stress handling products than other automotive attachment tapes. Typical applications include body side moldings, rocker panel moldings, claddings, wheel flares, bumper trim and other exterior and interior automotive trim components.
16′ X 350′ PLASTIC OVERSPRAY SHEETING IS AN ECONOMICAL WAY TO PROTECT SURFACES NOT BEING PAINTED. A THIN MIL PLASTIC SHEETING THAT IS FAST AND EASY TO HANDLE AND APPLY. IT WILL CLING TO SURFACES BEING MASKED AND RESISTS TEARING WHEN PULLING OR REPOSITIONING. SINCE IT IS CORONA TREATED PAINT WILL ADHERE WITHOUT FLAKING OFF, WHILE RESISTING SOLVENT PENTRATION AND PAINT BLEED THROUGH.
Our 3M™ White Masking Paper is specially treated to resist heat from paint booths and penetration by paint solvents, urethanes, base coats and clear coats – ideal for collision repair. It is tightly bonded, virtually eliminating lint or fiber contamination that can occur using paper masking. And its thin but conformable construction makes it easy to handle, boosting shop efficiency.
How Our Masking Paper Improves Your Collision Repair
Designed specifically for automotive aftermarket applications, our 3M™ White Masking Paper (PDF, 34 Kb) helps you work more efficiently during a full range of masking jobs large and small. It is durable yet conformable and is available in a variety of sizes, making it easy to handle for protecting even irregular vehicle surfaces from paint overspray. This paper is specially treated to resist penetration by paint solvents, base coats, clear coats and urethanes, reducing rework caused by bleed-through. It also withstands heat — the masking paper can hold up during a bake cycle up to 400°F (204°C) for 30 minutes, making it suitable for use in paint booths.
Designed Specifically for Automotive Aftermarket
This 3M™ White Masking Paper brings the science of 3M directly to auto body and collision repair, helping professionals work more efficiently and achieve their best results. Its design includes high tolerance to heat, resistance to chemical bleed-through and little or no loose lint or fibers — yet it still affords the easy, fast conformability of paper for truly effective masking.
3M™ Petrifilm™ Salmonella Express Confirmation Discs are part of the 3M™ Petrifilm™ Salmonella Express System, designed to provide fast, accurate qualitative detection and biochemical confirmation of Salmonella in 44 hours.
The 3M™ Petrifilm SALX System consists of an unique medium for the recovery and growth of Salmonella species, 3M™ Petrifilm™ Salmonella Express Plate that provides presumptive results and the 3M™ Petrifilm™ Salmonella Express Confirmation Disc for a biochemical confirmation. This system utilizes 3M Food Safety’s Petrifilm technology, an industry standard, and delivers an all-in-one test and biochemical confirmation method in as little as 44 hours .The 3M™ Petrifilm™ Salmonella Express System has been evaluated against defined requirements using scientific rigor to achieve AOAC® Performance TestedSM (Certificate #061301) and AOAC® Official Method of AnalysisSM (#2014.01).
Area of Application:
Especially easy to sand, two-component polyester filling putty. To be applied in order to equalize or close possible pin holes, small irregularities, small paint damages or scratches on the body of cars, vehicles or machines. Recommended also to be used as a putty and dowel setting material as well as an adhesive for iron, wood, stone and porcelain.
Characteristic Features:
– adhesive on iron, steel, aluminum, galvanized substrates and glass fiber
An advanced, clog-free, lightweight body filler for today’s high tech metals. Formulated with ZNX-7® for superior adhesion to galvanized steel, bare steel and aluminum. Part of the MetalWorks® System that honors the OEM corrosion warranty. Contains Hattonite™ for effortless sanding. Blue cream hardener included
High Performance Machine Polish. Quickly and effectively removes compound swirl marks and produces an outstanding finish. Good handling, easy cleanup. The Perfect-It brand means this is 3M`s highest performing machine polish.