Additional information
Weight | 1.13 lbs |
---|---|
Dimensions | 12 × 10 × 1 in |
Used in wet sanding, rough featheredging. Could be used for final sanding of plastic filler and putty. Most flexible backing with more consistent scratch pattern make this 3Ms best wet sanding product.
$76.40
In StockWeight | 1.13 lbs |
---|---|
Dimensions | 12 × 10 × 1 in |
3M™ Automotive Acrylic Foam Attachment Tape 06378 is a .030-inch thick gray acrylic foam tape with proven performance acrylic adhesive and a red release liner.
6378 is characterized by good peel and shear adhesion, good internal strength, good conformability and good plasticizer resistance. Typical applications include lightweight vehicle nameplates and trim, including narrow and light body side moldings. 06378 is not recommended for medium- to heavy-weight trim attachment.
Carworx Kombi Filler is a one component nitro cellulose stopper for filling small imperfections like scratches, pinholes and shallow dents. Due to its smooth consistency, Kombi Filler can be applied in very thin coats. After sanding, a porous free surface is provided which can be painted without the need of a primer.
Norton 6727, 12′ x 400′ Plastic Overspray Sheeting is an economical way to protect surfaces not being painted. The Norton 6727 is a thin mil plastic sheeting that is fast and easy to handle and apply. It will cling to surfaces being masked and resists tearing when pulling or repositioning. Since it is Corona treated paint will adhere without flaking off, while resisting solvent pentration and paint bleed through.
The 3M™ Particulate Filter 2071 is NIOSH approved for environments containing certain oil and non-oil based particles.
Use with 3M™ Respirators, 5000 Series or 3M™ Cartridge, 6000 Series with 3M™ Adapter, 502, or 3M™ Half and Full Facepiece, 6000, 3M™ Half and Full Facepiece, 7000, and 3M™ Half and Full Facepiece, FF-400 Series with bayonet filter holders. When properly fitted, use in a variety of applications such as grinding, sanding and welding for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. The filter is both flame and water resistant. Do not use in environments that are immediately dangerous to life or health (IDLH). 3M offers a wide array of options when it comes to cartridges and filters. 3M™ Respirator Cartridges and Filters offer easy installation to your Powered Air Purifying Respirators (PAPR) or Supplied Air Respirator assembly making them a great choice for fast paced industrial environments.
3M™ Automotive Attachment Tape 06377 is a .030-inch thick gray acrylic foam tape with proven performance acrylic adhesive and a red release liner.
3M™ Automotive Attachment Tape 06377 is characterized by good peel and shear adhesion, good internal strength, good conformability and good plasticizer resistance. Typical applications would include the attachment of lightweight vehicle nameplates
3M™ Weatherstrip Adhesive is a black, fast-drying adhesive used for bonding and sealing automotive weather-stripping.
3M™ Weatherstrip Adhesive is a black-coloured, high heat-resistant adhesive that is waterproof and remains flexible. It has a fast strength buildup, helps to provide good creep-resistance and is intended to bond to a variety of rubbers, fabrics and metal. The adhesive is also excellent for bonding ethylene propylene diene (EPDM) rubber.