your trusted source for automotive paint and refinishing
Shopping Cart$148.42
1
PROUDLY CANADIAN
FREE GROUND SHIPPING ON ORDERS OVER $450
View cart “DEBEER MM974 XIRALLIC GREEN 0.5L” has been added to your cart.
Sale!
3M 2097 PARTICULATE FILTER, 2097, P100
The 3M™ Particulate Filter 2097 is NIOSH approved for environments containing certain oil and non-oil based particles. 3M recommended for nuisance level organic vapour relief and for ozone protection up to 10X OSHA PEL.
3M™ Particulate Filter 2097 with nuisance level organic vapour relief helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. This filter helps protect against a wide range of oil and non-oil based particulate contaminants. The filter also offers nuisance level odour relief from organic vapours that are below the PEL. Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government exposure limits, whichever is lower. Do not use for respiratory protection against organic vapours or in environments that are Immediately Dangerous to Life or Health (IDLH). The 2097 is commonly used for welding, brazing, torch cutting, metal pouring and soldering. Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. The filter is both flame and water resistant. This filter is commonly used in the following industries: agriculture, construction, general manufacturing, pharmaceuticals, primary metals.
NIOSH approved for environments containing certain oil and non-oil-based particles
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
Nuisance level organic vapour relief
Advanced Electret Media (AEM) provides lightweight, easy breathing comfort
Suggested Applications
Nuisance level organic vapour relief
Welding
Brazing
Soldering
Metal pouring
Torch cutting
Exposure to lead, asbestos, cadmium, arsenic, and MDA
The 3M™ Advanced Particulate Filter 2297 is designed to make breathing easier while lasting longer. NIOSH approved for environments containing certain oil and non-oil based particles. 3M recommended for relief against nuisance level organic vapours and for ozone protection up to 10X OSHA PEL.
Use with 3M™ Respirators 5000 Series or 3M™ Cartridge 6000 Series with 3M™ Adapter 502, or 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders. When properly fitted, use in a variety of applications including welding, brazing, torch cutting, metal pouring, soldering, and exposure to lead, asbestos, cadmium, arsenic, and MDA for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half Facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Also offers nuisance level relief from organic vapours that are below the PEL. Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government occupational exposure limits, whichever is lower. The filter is both flame and water resistant. Not NIOSH certified for use against ozone. Do not use for respiratory protection against organic vapours or in environments that are Immediately Dangerous to Life or Health (IDLH).
NIOSH approved for environments containing certain oil and non-oil-based particles with nuisance organic vapour relief
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
Easier breathing
Long lasting
Suggested Applications
Nuisance level organic vapour relief
Welding
Brazing
Soldering
Metal pouring
Torch cutting
Exposure to lead, asbestos, cadmium, arsenic, and MDA
Unique centre adapter to direct exhaled breath and moisture downward, helps reduce debris from depositing in the valve, and allows for quick and easy cleaning
Large lens for wide field of view and excellent visibility
Norton Multi-Air Cyclonic is perfect for refinishing any job, especially those that require an extremely durable abrasive that cuts quicker, cuts cooler, and lasts longer without generating heat. Our engineered ceramic grain is the perfect abrasive for any job, including those with scratch-resistant clears and E-coats, composites and aluminum. Its versatility eliminates the need for additional specialty abrasives.
FEATURES & BENEFITS
• Norton SG ceramic grain for quicker/cooler cut with better longevity for superior cut on abrasion-resistant paints and clears
• Unique fiber-reinforced latex/paper backing is flexible and has easy removal with maximum tear resistance for increased durability
• Water-based stearate (No-Fil) improves load resistance and extends life
Champagne Magnum is sand paper technology at it’s best. It cuts faster, runs cooler, resists loading better and lasts far longer than any conventional sandpaper.
Premium heat-treated grain extends life and gives a 30 – 50% faster cut rate
Premium B-Weight latex paper backing improves performance, is more flexible and easier disc removal
FEPA P-graded grain achieves a more consistent uniform scratch pattern
Re-designed bond system optimizes grain adhesion and extends cut life
Newest water based stearate No-Fil improves load resistance
No pigment in No-Fil or bond eliminates the risk of color transfer and creates a much stronger bond
For scuffing before applying paint and primer-surfacer. Also used for used car reconditioning. cleaning upholstery, headlines and door pads, chrome and white wall tires. Rinses clean and does not rust. Can be used over and over again.
Norton 6728, 16′ x 400′ Plastic Overspray Sheeting is an economical way to protect surfaces not being painted. The Norton 6728 is a thin mil plastic sheeting that is fast and easy to handle and apply. It will cling to surfaces being masked and resists tearing when pulling or repositioning. Since it is Corona treated paint will adhere without flaking off, while resisting solvent pentration and paint bleed through.
Norton Multi-Air Cyclonic is perfect for refinishing any job, especially those that require an extremely durable abrasive that cuts quicker, cuts cooler, and lasts longer without generating heat. Our engineered ceramic grain is the perfect abrasive for any job, including those with scratch-resistant clears and E-coats, composites and aluminum. Its versatility eliminates the need for additional specialty abrasives.
FEATURES & BENEFITS
• Norton SG ceramic grain for quicker/cooler cut with better longevity for superior cut on abrasion-resistant paints and clears
• Unique fiber-reinforced latex/paper backing is flexible and has easy removal with maximum tear resistance for increased durability
• Water-based stearate (No-Fil) improves load resistance and extends life
Mask Filters
Reviews
There are no reviews yet.