your trusted source for automotive paint and refinishing
Shopping Cart$0.00
0
PROUDLY CANADIAN
FREE GROUND SHIPPING ON ORDERS OVER $450
Sale!
3M 06405 Plastic Vinyl Tape – 1/4″ X 36Yd
3M™ Vinyl Tape 471+ Indigo, vinyl backing with a rubber adhesive, maintain color even when exposed to heavy abrasion, conformable, maintain color throughout not printed, dead stretch properties to provide straighter lines, clean removability.
Scotch® Performance Green Masking Tape 233+, 26340 is a highly-conformable tape that provides the best adhesive transfer resistance, hugs curves, contours and provides outstanding paint lines. Goes on quickly and easily, sticks at a touch and stays put.
3M™ Automotive Acrylic Plus Attachment Tape 06382 is a .045-inch thick, medium-density, black acrylic foam tape with high performance acrylic adhesives on both sides and a red release liner.
Acrylic Plus Attachment Tapes are OEM approved and are stronger, higher performing, high stress handling products than other automotive attachment tapes. Typical applications include body side moldings, rocker panel moldings, claddings, wheel flares, bumper trim and other exterior and interior automotive trim components.
Use these 180+ grade sheets for sanding plastic filler, rough featheredging or the final sanding step before priming. Built with patented 3M Cubitron™ II precision shaped abrasive grains, these sheet roll abrasives cut faster and last longer than other sandpapers.
These sheet rolls feature our unique kiss-cut scorring technology which enables users to be cleanly and easily converted into multiple sheet-lengths. For maximum dust removal, 3M has added hundreds of small holes which have been purposely arranged in a chevron formation.
The triangular-shaped ceramic grains of Cubitron™ II are electrostatically oriented to form sharp peaks, each acting like an individual cutting tool that slices through paint and body filler, wearing evenly, and providing long life.
Carworx 2.1 VOC Bullet is a high production clearcoat system developed for spot repair and one panel repair. This 4:1 mix clearcoat is a 3 coat system that can be sanded and buffed in 20-25 minutes air dry or baked for 5 minutes at 130°F(54.4°C) metal temperature.
It is a 4:1 mix withActivator (#191.101)
Applied in 3 light coats wet-on-wet with no flash times between coats.
For dry sanding old paint, primer, primer surfacer, and between-color coats; also for deburring, removing sand scratches, shaping and finishing plastic filler, and featheredging repaired areas. Special No-Fil coating prevents premature loading. Can be cut into halves or thirds to fit neatly on jitterbug sanders.
Economic, durable topcoats. Use Power Can Aerosols to finish primed surfaces to create a high gloss finish. Can be used on ABS, PVC, TPO, EDPM, polypropylene, aluminum, and galvanized.
Features:
Easy to use and flexible
Convenience of a spray can reduces paint consumption and waste
Adhesive Tape
