Additional information
Weight | 1.03 lbs |
---|---|
Dimensions | 8 × 3 × 2 in |
Carworx Kombi Filler is a one component nitro cellulose stopper for filling small imperfections like scratches, pinholes and shallow dents. Due to its smooth consistency, Kombi Filler can be applied in very thin coats. After sanding, a porous free surface is provided which can be painted without the need of a primer.
$14.95
In StockWeight | 1.03 lbs |
---|---|
Dimensions | 8 × 3 × 2 in |
EVERGLASS is a multi-fiber reinforced body repair filler ideal for filling holes, rusted metal, body seams, welds and shattered fiberglass.
• “No touch” contamination-free storage and dispensing of strainers.
• Pre-packed pods load directly into Elite Dispenser (color coded mesh only).
• Automated production with triple-cleaned mesh assures highest level of filter purity.
• Color-coded filter for easy identification of micron size
Automotive Refinish Masking Tape is designed for masking before painting — it bends and stretches to follow curved body lines with no edge lifting, leaves sharp paint lines, removes easily with no adhesive transfer. Waterborne paint compatible.
24 ROLLS/CASE
Automotive Refinish Masking Tape is designed for masking before painting — it bends and stretches to follow curved body lines with no edge lifting, leaves sharp paint lines, removes easily with no adhesive transfer. Waterborne paint compatible.
48 ROLLS/CASE
A flexible polyester glazing putty designed for spot filling and skim coating over repair areas on flexible bumpers and plastic parts. Its flowable viscosity is ideal for filling minor imperfections such as sand scratches, nicks, dings and gouges. Poly-Flex™ may also be used to skim coat over repair areas or large surface areas that have the original paint still intact. Blue cream hardener included.
The 3M™ Multi-Gas/Vapour Cartridge/Filter 60926 is NIOSH approved against certain organic vapours, acid gasses and particulates. Use with 3M™ Half and Full Facepiece Respirators 6000, 7000 and FF-400 Series with bayonet filter holders.
3M™ Multi-Gas/Vapour Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapours, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are Immediately Dangerous to Life or Health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, oil and gas, and primary metals.