Additional information
Weight | 10 lbs |
---|---|
Dimensions | 10 × 7 × 5 in |
DESCRIPTION:
Carworx 2.1 VOC Bullet is a high production clearcoat system developed for spot repair and one panel repair. This 4:1 mix clearcoat is a 3 coat system that can be sanded and buffed in 20-25 minutes air dry or baked for 5 minutes at 130°F(54.4°C) metal temperature.
Applied in 3 light coats wet-on-wet with no flash times between coats.
4:1 mix with Activator (#191.101)
*Hardener must be ordered separately*
$98.52
In StockWeight | 10 lbs |
---|---|
Dimensions | 10 × 7 × 5 in |
Taff-Guard two layer intake panels are constructed using two synthetic layers of media sealed over a metal wire frame. The first layer, dry and white, acts as a pre-filter to remove the medium and large particles. The second layer, green with an adhesive, removes and retains the smaller particles.
Typically, this intake filter is installed in the paint booth doors and/or ceilings. However, these paint booth filters can be used in any standard HVAC application as well.
100% synthetic material with tack layer to trap dirt particles
Low resistance to air flow which results in minimal energy costs
Will not absorb moisture or humidity
Prefilter for multistage units
Paint Booth, Spray Booth and Auto body filter
Standard HVAC applications
A two component primer surfacer that has exceptional filling capabilities and patented 4:1 mix ratio technology. It is ideal for holding down troublesome repairs on fiberglass and SMC. Super Build 4:1 passes 500 hours in salt spray tests (ASTM B117) and can be applied over properly sanded and cleaned bare metal. It is compatible with waterborne paint systems and VOC compliant. Must be catalyzed with 733 4:1 Polyester Primer Catalyst or 734 Fast Polyester Primer Catalyst only!
Maxim™ Control Flow seam sealer is a high strength, heavy bodied partial flow seam sealer. Its limited flow characteristics make it ideal for sloped areas such as roof lines or matching OEM sealants. Maxim™ Control Flow Seam Sealer is compatible with most topcoats and can be applied to bare metal, cured paint and surfaces primed with primer surfacers or E-coats.
NIOSH approved for protection against certain organic vapours
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
Not suitable for use in environments that are Immediately Dangerous to Life or Health (IDLH)
Thin attachment tape offers flush application of emblems and nameplates
Closed cell acrylic foam tape delivers stress relaxation under load
Narrow profile offers high conformability
High performance adhesive on both sides delivers high peel and shear adhesion
Features 3M™ Precision-Shaped Grain, triangular-shaped grains that cut at least 30% faster and last at least 30% longer than other conventional ceramic abrasives
Clean Sanding multi-hole pattern delivers excellent dust extraction
3M™ Hookit™ hook-and-loop style abrasive attaches firmly, removes quickly for fast change-out
70mm x 8mm
Top performer: This premium automotive masking tape is designed for performance, versatility, and reliability.
High adhesive propoerties: Sticks easily and stays in place on a variety of surfaces, such as plastic, glass, metal and rubber.
Resistant: Offers dependable resistance to UV, temperature, moisture, chemicals, and waterborne and solvent-based paints.
12 ROLLS/CASE