Additional information
Weight | 1 lbs |
---|---|
Dimensions | 12 × 2 × 2 in |
BETASEAL™ U-418 speeds installations – eliminates the glass priming step. BETASEAL U-418 provides primerlessto-glass convenience with excellent workability, sag resistance and convenient drive-away times. BETASEAL U-418 is easy to use and does not require heating. It is available in cartridges. Product benefits include: Primerless to auto glass FMVSS crash proven Meets all long-term durability requirements Ready to use – no heating required Applications Structurally bonded or direct glazed automotive glass, such as windshields, backlites, quarter glass and other stationary glass Other uses such as attaching hardware to glass and backfilling to install reveal moldings or other trim BETASEAL U-418 Quick Cure Auto Glass Urethane Adhesive Application details See vehicle manufacturer’s recommendations for additional details. Do not use any other manufacturers’ primers, cleaners or other chemicals in conjunction with any BETASEAL adhesive system Apply at temperatures of 40˚F (4.4˚C) and warmer Physical properties Appearance – black, smooth paste Solids content – 94% Flash point – > 110˚F (43˚C) Weight per volume – 10.1 lbs/gal Specific gravity – 1.2 Sag – none Odor – minimal Tack-free time – 25 minutes after application at 72˚F (22˚C) and 50% RH Working time – 15 minutes at 72˚F (22˚C) and 50% RH Full cure – less than 24 hours at 72˚F (22˚C) and 50% RH
$18.53
In StockWeight | 1 lbs |
---|---|
Dimensions | 12 × 2 × 2 in |
Hardening agent for use with all polyester resins and gel coats. Plastic squeeze tube has graduated measure for mixing convenience. Use this Methyl Ethyl Ketone Peroxide catalyst according to the resin/gel coat label directions
One Step is a high build, easy to use self etch primer that provides excellent adhesion for additional top coats, primers and sealers to metal. Compatible with all primer surfacers for spot repair and refinishing. Apply to steel, aluminum and most metals.
An easy to use high build, paintable rocker coating that matches OEM textures and provides excellent abrasion and chip protection, sound deadening, and corrosion resistance.
Ideal for applications where average or medium texture patterns are desired.
BLACK.
Used in wet sanding, rough featheredging. Could be used for final sanding of plastic filler and putty. Most flexible backing with more consistent scratch pattern make this 3Ms best wet sanding product.
A translucent linered tape with a rigid band to lift pliable molding to allow paint coverage under the molding, thus eliminating a visible paint edge.