Scotch-Brite™ Roloc™ Surface Conditioning Disc 07485 offers ease of disc centering and is used in conjunction with 3M™ Roloc™ Disc Pad Assembly 05540. Available from tough grinding to fine finishing. 3 inch diameter. Coarse.
Farecla G3 Fine Finishing Polish, 1 kg/1 Liter (G3F101/00141) offers rapid removal of minor surface defects and swirl marks from all modern paint systems and is excellent on darker colors.
Fast scratch removal permanently removes P3000 and finer sanding marks and restores gloss from lightly oxidized paint work and dull surfaces leaving a brilliant high gloss finish. Dry use and clean to use results in easy clean up, minimal splatter and dusting.
G3 Fine is ideally applied using a Farecla G Mop Finishing Black Foam or Lambswool buff pads which was engineered in tandem with the compound to provide optimum performance or similar soft finishing pad or by hand.
Designed for use on Medium Solids (MS), High Solids (HS) and Ultra High Solids (UHS) paints and Scratch Resistant Clears.
A two component primer surfacer that has exceptional filling capabilities and patented 4:1 mix ratio technology. It is ideal for holding down troublesome repairs on fiberglass and SMC. Super Build 4:1 passes 500 hours in salt spray tests (ASTM B117) and can be applied over properly sanded and cleaned bare metal. It is compatible with waterborne paint systems and VOC compliant. Must be catalyzed with 733 4:1 Polyester Primer Catalyst or 734 Fast Polyester Primer Catalyst only!
3M™ Paste Rubbing Compound is specially designed to remove fine 1200, 1500 and 2000 grit sanding scratches in a wide range of automotive paint including clear coat. This compound for collision repair adds a fast cutting option to our complete paint finishing system, created for deeper colors and glossier finishes. Use with either a wool or foam compounding pad.
Norton Multi-Air Cyclonic is perfect for refinishing any job, especially those that require an extremely durable abrasive that cuts quicker, cuts cooler, and lasts longer without generating heat. Our engineered ceramic grain is the perfect abrasive for any job, including those with scratch-resistant clears and E-coats, composites and aluminum. Its versatility eliminates the need for additional specialty abrasives.
FEATURES & BENEFITS
• Norton SG ceramic grain for quicker/cooler cut with better longevity for superior cut on abrasion-resistant paints and clears
• Unique fiber-reinforced latex/paper backing is flexible and has easy removal with maximum tear resistance for increased durability
• Water-based stearate (No-Fil) improves load resistance and extends life
Champagne Magnum is sand paper technology at it’s best. It cuts faster, runs cooler, resists loading better and lasts far longer than any conventional sandpaper.
Premium heat-treated grain extends life and gives a 30 – 50% faster cut rate
Premium B-Weight latex paper backing improves performance, is more flexible and easier disc removal
FEPA P-graded grain achieves a more consistent uniform scratch pattern
Re-designed bond system optimizes grain adhesion and extends cut life
Newest water based stearate No-Fil improves load resistance
No pigment in No-Fil or bond eliminates the risk of color transfer and creates a much stronger bond
Abrasives
