MASTER 16400- PPS Kit 125 Micron Lids & Liners

• Midi (13.5 oz./400ml) lids (with pre-welded filters) are designed for mixing, filtering and spraying of primer, sealer, base coat and clear coat
• 125 micron filters are often recommended for waterborne paint materials

3M™ PPS™ Series 2.0 Spray Cup System Kit, 26325 Large (28 fl oz, 850 mL), 125u Micron Filter, 1 kit per case3M™ PPS™ Series 2.0 Spray Cup System is our next generation, highest-performing 3M™ Paint Preparation System (PPS™) on the disposable spray cup market. Kit contains 50 disposable lids with 200 micron or 125 micron filters, 50 disposable liners, 1 reusable hard shell cup and 32 sealing plugs.

Kit contains 25 disposable lids with 200 micron filters, 25 disposable liners, and 10 sealing plugs. The 200 micron filters are recommended for traditional solvent based paint or primer applications. Graduated measurement to 28 oz/840 mL. when used with with mix ratio film insert (mix ratio film inserts are sold separately) For use with part number 16023 or 16124

• Better flow and consistency for a better end result
• Quarter-turn lid locking system stays cleaner, locks faster, with fewer assembly steps
• Easy to use
• Cup windows allow you to hold the liner for cleaner, easier lid removal, and to check paint levels with ease

Kit contains 50 disposable lids with 125 micron filters – full diameter – , 50 disposable liners, and 20 sealing plugs. The 125 micron filters are recommended for water borne paint or primer applications. Graduated measurement to 20.3 oz/600 mL when used with mix ratio film insert (mix ratio inserts sold separately). For use with part number 16001.

Kit contains 50 disposable lids with 200 micron filters, 50 disposable liners, and 20 sealing plugs. The 200 micron filters are recommended for traditional solvent based paint or primer applications. Graduated measurement to 5 1/2 oz when used with generic mix ratio film insert (mix ratio inserts sold separately). Max. capacity of 6 fl oz. For use with part number 16115. Note: mix ratio film inserts are sold separately.

PPS™ is a complete painting system from 3M™ which produces cleaner jobs, saves on solvent usage and gun cleaning time and can improve operator efficiency by as much as 15%. Specifically designed adapters allow painters to use the PPS™ system with virtually any spray gun.
PPS™ replaces traditional mixing cups and filters and drastically reduces the amount of solvent required for gun cleaning. The liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. It is possible to clean your paint gun with as little as 3 ounces of solvent. With these disposable parts, shops can see a 70% savings in cleaning solvent use — meaning less operator exposure to solvents and reduction in VOCs.
Since PPS™ uses the same cup for mixing and spraying, there less risk of outside contamination, less time spend mixing and cleaning.