For dry sanding old paint, primer, primer surfacer, and between-color coats; also for deburring, removing sand scratches, shaping and finishing plastic filler, and featheredging repaired areas. Special No-Fil coating prevents premature loading. Can be cut into halves or thirds to fit neatly on jitterbug sanders.
Champagne Magnum is sand paper technology at it’s best. It cuts faster, runs cooler, resists loading better and lasts far longer than any conventional sandpaper.
Premium heat-treated grain extends life and gives a 30 – 50% faster cut rate
Premium B-Weight latex paper backing improves performance, is more flexible and easier disc removal
FEPA P-graded grain achieves a more consistent uniform scratch pattern
Re-designed bond system optimizes grain adhesion and extends cut life
Newest water based stearate No-Fil improves load resistance
No pigment in No-Fil or bond eliminates the risk of color transfer and creates a much stronger bond
SAS Safety Corp. Raven disposable gloves are powder-free 6 mil nitrile, superior puncture and abrasion resistant with a beaded cuff and textured grip. They are latex-free and ambidextrous, coming in a box of 100 gloves by weight.
Manufacturer Information
For over 30 years, SAS Safety Corporation has been providing products and equipment designed to make workplaces safer. We are dedicated to providing quality products that protect and preserve our most valuable resource: people. We offer a complete line of personal protective equipment; eye and face, hand, body, respiratory and hearing protection, as well as first-aid kits, ergonomic, spill control, and traffic safety products. Our customer service staff is just a phone call away to assist companies and individuals looking for effective and cost-efficient safety products.
16′ X 350′ PLASTIC OVERSPRAY SHEETING IS AN ECONOMICAL WAY TO PROTECT SURFACES NOT BEING PAINTED. A THIN MIL PLASTIC SHEETING THAT IS FAST AND EASY TO HANDLE AND APPLY. IT WILL CLING TO SURFACES BEING MASKED AND RESISTS TEARING WHEN PULLING OR REPOSITIONING. SINCE IT IS CORONA TREATED PAINT WILL ADHERE WITHOUT FLAKING OFF, WHILE RESISTING SOLVENT PENTRATION AND PAINT BLEED THROUGH.
Gerson tack cloths are approved by leading Auto, Marine, Aerospace and Electronics manufacturers. We offer a complete assortment of cotton and synthetic tack cloths for high, medium and low-tack applications. Gerson is a leading, prime manufacturer of Tack Cloths for critical surface preparation. A complete range of substrates are available, from lint-free knit polyester to nonwovens to 100% cotton gauze.
Dry tack formulation
Completely removes surface particles without harmful residues
Multi-purpose undercoating may be applied to cars, truck and recreational vehicles
Sound deadening properties help reduce road noise
Anti-corrosive coating protects the undercarriage of vehicles from rust and abrasion
Aerosol dispenser allows for easy spray-on application
3M™ Rubberized Undercoating produces a textured finish which resists chipping, abrasion, exterior rusting and weathering. Provides one-coat build-up with no dripping, running or sagging.
Automotive Refinish Masking Tape is designed for masking before painting — it bends and stretches to follow curved body lines with no edge lifting, leaves sharp paint lines, removes easily with no adhesive transfer. Waterborne paint compatible.
3M™ Green Corps™ Roloc™ Disc, 50 grade, 3 inch, 01406 is generally used for hard to reach areas in paint, rust, and weld removal. Handy quick change tool for disc grinding which fits any standard 1/4 in drill or air tool. Recommended back up pad 05540. Green button.
NIOSH approved against certain organic vapors, acid gases, ammonia methylamine, formaldehyde with P100 particulate filter
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
Wide range of applications reduces inventory needs
To establish cartridge replacement frequency visit: 3M.com/ServiceLifeSoftware
Details
The 3M™ Multi-Gas/Vapour Cartridge/Filter 60926 is NIOSH approved against certain organic vapours, acid gasses and particulates. Use with 3M™ Half and Full Facepiece Respirators 6000, 7000 and FF-400 Series with bayonet filter holders.
3M™ Multi-Gas/Vapour Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapours, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are Immediately Dangerous to Life or Health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, oil and gas, and primary metals.
NIOSH approved against certain organic vapors, acid gases, ammonia methylamine, formaldehyde with P100 particulate filter
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
Wide range of applications reduces inventory needs
To establish cartridge replacement frequency visit: 3M.com/ServiceLifeSoftware
Abrasives
