Additional information
Weight | 2 lbs |
---|---|
Dimensions | 7 × 7 × 4 in |
Features:
· 30% – 50% gains in cut rate, far less loading on the job and greater worklife.
· Entirely new level of work speed is attainable.
· Agressive sanding action isn`t easily dulled.
· New anti-loading agent which actually throws dust from the grain as it cuts.
· New latex-reinforced backing can withstand whatever job torture you throw at it.
· Unparalled speed, scratch consistency and an overall quality of finish never before achieved.
$79.95
In StockWeight | 2 lbs |
---|---|
Dimensions | 7 × 7 × 4 in |
Taff-Guard two layer intake panels are constructed using two synthetic layers of media sealed over a metal wire frame. The first layer, dry and white, acts as a pre-filter to remove the medium and large particles. The second layer, green with an adhesive, removes and retains the smaller particles.
Typically, this intake filter is installed in the paint booth doors and/or ceilings. However, these paint booth filters can be used in any standard HVAC application as well.
100% synthetic material with tack layer to trap dirt particles
Low resistance to air flow which results in minimal energy costs
Will not absorb moisture or humidity
Prefilter for multistage units
Paint Booth, Spray Booth and Auto body filter
Standard HVAC applications
A two component primer surfacer that has exceptional filling capabilities and patented 4:1 mix ratio technology. It is ideal for holding down troublesome repairs on fiberglass and SMC. Super Build 4:1 passes 500 hours in salt spray tests (ASTM B117) and can be applied over properly sanded and cleaned bare metal. It is compatible with waterborne paint systems and VOC compliant. Must be catalyzed with 733 4:1 Polyester Primer Catalyst or 734 Fast Polyester Primer Catalyst only!
NIOSH approved for protection against certain organic vapours
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
Not suitable for use in environments that are Immediately Dangerous to Life or Health (IDLH)
Thin attachment tape offers flush application of emblems and nameplates
Closed cell acrylic foam tape delivers stress relaxation under load
Narrow profile offers high conformability
High performance adhesive on both sides delivers high peel and shear adhesion
A general-purpose packaging tape for light duty storage and sealing applications. This economical yet reliable tape resists tearing, splitting, curling and moisture. Ideal for noncritical sealing applications.
3M™ Tartan™ Box Sealing Tape is a general-purpose packaging tape used for noncritical box sealing applications. This product has a conformable backing and a pressure-sensitive hot melt adhesive system. This construction provides a good closure for lightweight boxes exposed to minimal distribution hazards.