Additional information
Weight | 2.56 lbs |
---|---|
Dimensions | 14 × 9 × 6 in |
Kit contains 50 disposable lids with 200 micron filters, 50 disposable liners, and 20 sealing plugs. The 200 micron filters are recommended for traditional solvent based paint or primer applications. Graduated measurement to 5 1/2 oz when used with generic mix ratio film insert (mix ratio inserts sold separately). Max. capacity of 6 fl oz. For use with part number 16115. Note: mix ratio film inserts are sold separately.
PPS™ is a complete painting system from 3M™ which produces cleaner jobs, saves on solvent usage and gun cleaning time and can improve operator efficiency by as much as 15%. Specifically designed adapters allow painters to use the PPS™ system with virtually any spray gun.
PPS™ replaces traditional mixing cups and filters and drastically reduces the amount of solvent required for gun cleaning. The liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. It is possible to clean your paint gun with as little as 3 ounces of solvent. With these disposable parts, shops can see a 70% savings in cleaning solvent use — meaning less operator exposure to solvents and reduction in VOCs.
Since PPS™ uses the same cup for mixing and spraying, there less risk of outside contamination, less time spend mixing and cleaning.
$172.13
In StockWeight | 2.56 lbs |
---|---|
Dimensions | 14 × 9 × 6 in |
Maxim™ Control Flow seam sealer is a high strength, heavy bodied partial flow seam sealer. Its limited flow characteristics make it ideal for sloped areas such as roof lines or matching OEM sealants. Maxim™ Control Flow Seam Sealer is compatible with most topcoats and can be applied to bare metal, cured paint and surfaces primed with primer surfacers or E-coats.
Features:
Kit contains 25 disposable lids with 125 micron filters, 25 disposable liners, and 10 sealing plugs. The 125 micron filters are recommended for water borne paint or primer applications. Graduated measurement to 28 oz/840 mL when used with with mix ratio film insert (mix ratio inserts sold separately). For use with part number 16023 or 16124.
3M™ Weatherstrip Adhesive is a black, fast-drying adhesive used for bonding and sealing automotive weather-stripping.
3M™ Weatherstrip Adhesive is a black-coloured, high heat-resistant adhesive that is waterproof and remains flexible. It has a fast strength buildup, helps to provide good creep-resistance and is intended to bond to a variety of rubbers, fabrics and metal. The adhesive is also excellent for bonding ethylene propylene diene (EPDM) rubber.