Adhesives
Showing 1–18 of 46 results
- Adhesives
CARWORX 135.693
Seam & Joint Sealer- White (300ML)Paintable in 30 minutes. Permanently flexible with no shrinkage. Withstands salt water and most solvents
(0 reviews) - Adhesives
CARWORX 330.071
Super Glue (3g)Area of application:
Excellent Adhesion for porous and non-porous surfaces.
Characteristics:
Sets quickly.
(0 reviews) - Adhesives
NORTON 6419
Metal Door Skin BondingTwo-part epoxy (1:1) used to repair most plastic parts, including bumper covers and other plastic body panels including PP, fiberglass, Metton, Telene, SMC, TEO and urethane. Formulated to finish the front side of flexible repairs or used over the top of urethane adhesives. Incredibly easy to sand in 20 minutes or less. No plastic identification required. No adhesion promoter needed No tip needed-hand mix with a clean spreader. Work time: 1-2 mins Sanding Time: 15-20 mins Paint/Cure time: 60 mins.
(0 reviews) - Adhesives
NORTON 4628
Speedgrip Mixing Tip• 24-element tips ensure automatic mixing for 220ml to 600ml
(0 reviews) - Adhesives
3M 80119
Weather Strip Adhesive- Flexible
- Fast strength buildup with good creep resistance
- Fast drying
- Resists oil, grease and solvents
- Not degraded by contact with most other chemicals
- Less than 4 minute work time
- Fully cured in 24 hours
- Paste-like consistency
3M™ Weatherstrip Adhesive is a black, fast-drying adhesive used for bonding and sealing automotive weather-stripping.
3M™ Weatherstrip Adhesive is a black-coloured, high heat-resistant adhesive that is waterproof and remains flexible. It has a fast strength buildup, helps to provide good creep-resistance and is intended to bond to a variety of rubbers, fabrics and metal. The adhesive is also excellent for bonding ethylene propylene diene (EPDM) rubber.
(0 reviews) - Adhesives
3M 08475
3/8″x30 Seam Sealer TapeThe 3M 08475, 3/8″ Seam Sealer Tape is a rubber backed, .020 thick tape with a very conformable design which allows the technician to duplicate the factory appearance and function typically found in door jams, trunk gutters, and hem flanges. Paintable immediately and does not require the use of heat to set. Very conformable.
(0 reviews) - Adhesives
3M 08463
Flexible Foam- 200ML3M™ Flexible Foam is a soft and flexible two-part urethane material which foams in place (closed-cell foam). It is designed to replace OEM’s flexible foams found on door intrusion beams, roof bows, inside body panels, pillars, and in other automotive body cavities. Expands to 10 times its original volumeto fill large cavities with a small amount of material. Can be used for OEM replacement of flexible foams to “pre-accident condition” as much as possible.
(0 reviews) - Adhesives
3M 08458
Rigid Pillar Foam Cartridge- 200ML- A high-performance, two-component rigid urethane closed-cell foam offers delayed reaction time
- Foam fills posts, pillars, and other automotive body cavities to prevent panel flutter or provide rigidity
- Expanding properties of foam fill hard-to-reach cavities
- Foam replicates appearance and performance of many OEM products
- Easy to apply with 3M™ Automix™ Applicator Gun
3M™ Rigid Pillar Foam is a two part urethane which foams in place to fill posts, pillars, and automotive body cavities with exceptional ease and consistent quality. This foam is easily to apply with a range of manual and pneumatic 3M applicators.
(0 reviews) - Adhesives
3M 08308
Heavy- Bodied Seam SealerThe 3M 08308, Automix Heavy-Bodied Seam Sealer is a two-part epoxy seam sealer for use in sealing vertical or horizontal seams to match OEM sealers. It is non-sagging, non-flowing, and easy to tool. Paintable in 30 minutes, worktime is 10 minutes. No shrinkage or cracking. Beads will remain the same size and shape as extruded. Will cure in about 1 hour. Will need 3M # 08117 Applicator Gun.
(0 reviews) - Adhesives
3M 08219
SMC/Fibreglass 35min Repair AdhesiveThe 3M 8219, Automix / Fiberglass Repair Adhesiveis a two-part urethane adhesive that is used to bond SMC and FRP (traditional fiberglass) body panels to each other and to metal. It is designed to bond composite and metal to each other, along with metal to metal applications. Requires 3M 08117, Applicator Gun to apply.
(0 reviews) - Adhesives
3M 08116
Automix Panel Bonding AdhesiveTwo-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass). The primary use is to replace quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins. Meets GM 6449G & Chrysler MS-CD 507.
(0 reviews) - Adhesives
3M 08193
Nozzles For 200ML Cartidges3M Nozzles for 200 mL Cartridges efficiently mix a variety of 3M two-component products such as adhesives, sealers and foams. Nozzles work easily with two-component cartridges
(0 reviews) - Adhesives
3M 06396
4298 Adhesion Promoter Sponge3M 06396, Automotive Adhesion Promoter Wipes
- Box of 25 Packets
3M Adhesion Promoter 06396 is a liquid primer used for most low surface energy plastics. This would include common low surface energy plastics used for automotive dash and interior trim applications (TPO, PPO, PP, PC, PC + ABS, etc.). 25 Individual Packages per Box.
(0 reviews) - Adhesives
DOMINION SXPP24
480GRAM POLYPROP ADHESION AID AEROSOLAdhesion Promoter (SXPP/SXPP24/XPPP) is a uniquely formulated blend of proprietary resins that create a chemical bond on ‘difficult to bond to’ plastics allowing adhesion of repair fillers and coatings to these substrates. Adhesion Promoter prepares properly cleaned and/or repaired parts for the application of adhesives, fillers and topcoats. Adhesion Promoter is also used as an excellent “sealer” for all Flexible and Semi-Rigid plastics including TPO and TPE.
(0 reviews) - Adhesives
DOMINION XSM8002
EPOXY SEAM SEALERHigh performance, non sag, high solids two component epoxy sealer. Designed for use where a high quality, fast setting and fast paint time sealer is desired. This product provides the latest in technology for sealing seams and faster paint time thatn the traditional sealers on the market today. With XSM8002, the seam sealer process is no longer the hold up in production. Extrudes easily. Excellent tooling with no shrinkage. uses include body panel seam sealer, truck bed seam sealer, all cosmetic seams, bonding of ground effects, sealing door skins. Compatible with all epoxy and urethane repair material and topcoats. Work time 8-10 minutes
(0 reviews) - Adhesives
DOMINION XSM9002
200ML SELF LEVEL SEAM SEALERHigh performance, self leveling, no VOC, epoxy sealer. Designed for use where a high quality, fast setting; with fast paint time sealer is desired. This product provides user with the ability to duplicate the factory self leveling sealer apperance on stacking cosmetic seams, trunk seams, floor pans, drip rails, and core supports. The most common application is on drip rails. requires no additional tooling and is compatible with epoxy and urethane repair materials and topcoats. Work tim 5-10 minutes. Paint 30-60 minutes
(0 reviews) - Adhesives
DOMINION XSM16002
207ML CONTROL FLOW SEAM SEALERIdeal for seams and gutters. The high strength formula bonds to metals and most plastics.
(0 reviews) - Adhesives
DOMINION XSM15002- 207ML SUPER FAST URETHANE
Urethane Adhesive for use on metal, plastic, SMC, fiberglass and all “olefenic” plastics. Multi-purpose use to bond, repair and fill. Superfast
Part: XSM15002 Code:15002
See technical data for more details.250 ml Universal Cartridge
(0 reviews)