CARWORX 135.693- Seam & Joint Sealer- White (300ML)
Paintable in 30 minutes. Permanently flexible with no shrinkage. Withstands salt water and most solvents
|Dimensions||11 × 1.75 × 1.75 cm|
High performance strip abrasive for coarse, medium and fine sanding of polyester putty filler and paint materials. It has a dust repellent coating.
High performance abrasive for machine sanding surfaces. Stands out because of its good initial abrasiveness, its high durability and the very fine finish in higher grits.
Roll : 70 mm x 50 m
American® brand AM is the cost-effective solution designed to perform in many automotive masking applications.
AM’s rubber-based adhesive provides adhesion to painted surfaces, bare metals and plastics, yet removes cleanly without adhesive residue, paint “flaking” from backside or surface staining.
- Sharp color separation on curves or straight lines
- Good Corning
- Exceptional cornering
- Smooth to the touch – easy to work with
- High temperature resistance: 225oF (121oC) for
- 3 day UV resistance
- Excellent adhesion to backing when layered
- Smooth and controlled unwind
- Works with both solvent and waterborne paints
- Clean removal; stain resistant; resists bleed-through
Please Note: This item is only available to be shipped Australia-wide
- Fast strength buildup with good creep resistance
- Fast drying
- Resists oil, grease and solvents
- Not degraded by contact with most other chemicals
- Less than 4 minute work time
- Fully cured in 24 hours
- Paste-like consistency
3M™ Weatherstrip Adhesive is a black, fast-drying adhesive used for bonding and sealing automotive weather-stripping.
3M™ Weatherstrip Adhesive is a black-coloured, high heat-resistant adhesive that is waterproof and remains flexible. It has a fast strength buildup, helps to provide good creep-resistance and is intended to bond to a variety of rubbers, fabrics and metal. The adhesive is also excellent for bonding ethylene propylene diene (EPDM) rubber.
Norton 6728, 16′ x 400′ Plastic Overspray Sheeting is an economical way to protect surfaces not being painted. The Norton 6728 is a thin mil plastic sheeting that is fast and easy to handle and apply. It will cling to surfaces being masked and resists tearing when pulling or repositioning. Since it is Corona treated paint will adhere without flaking off, while resisting solvent pentration and paint bleed through.
Two-part polyester finishing and blending putty. Includes ZNX-7® for adhesion to galvanized metal, aluminum, steel, SMC, and O.E.M paint. Extra-thin formula spreads smoothly. Easily fills grind marks, pinholes, uneven surfaces and other MetalWorks® body fillers and glazing putties to enhance their ease of working. Sands easily. Pinhole-free. Helps prevent staining or bleed-through when used under basecoat/clearcoat paint systems. Blue cream hardener included.