your trusted source for automotive paint and refinishing
Shopping Cart$0.00
0
PROUDLY CANADIAN
FREE GROUND SHIPPING ON ORDERS OVER $450
Sale!
NORTON 4615 Urethane Adhesive- 1 Min
Norton SpeedGrip Urethane Structural Adhesives are a versatile and fast two part urethane system for bonding and repairing steel, aluminum, flexible, semi-rigid and rigid plastic and fiberglass. All products perform the same on all materials. Just select the working time that best fits your needs
Mixing Tips by Evercoat®. Maxim™ Static Mixing Tips are designed to be used with Evercoat’s Maxim™ two-component products 812, 813,815, 816, 822, 823, 885, 886 887, and 898. If you’re looking for a quality product that will serve you for years to come, look no further.
A permanent, flexible sealant that matches OEM brushed in sealers. Duplicates trunk, cowling, floor pan and other factory sealers. Dries quickly. Paintable in 30 minutes and won’t lift behind brush on rough surfaces.
Norton Multi-Air Cyclonic is perfect for refinishing any job, especially those that require an extremely durable abrasive that cuts quicker, cuts cooler, and lasts longer without generating heat. Our engineered ceramic grain is the perfect abrasive for any job, including those with scratch-resistant clears and E-coats, composites and aluminum. Its versatility eliminates the need for additional specialty abrasives.
FEATURES & BENEFITS
• Norton SG ceramic grain for quicker/cooler cut with better longevity for superior cut on abrasion-resistant paints and clears
• Unique fiber-reinforced latex/paper backing is flexible and has easy removal with maximum tear resistance for increased durability
• Water-based stearate (No-Fil) improves load resistance and extends life
SATA® RPS™ – The disposable cup system for mixing and painting
SATA RPS (Rapid Preparation System) is the ideal cup system for shops focusing on perfect finishes and high profitability.
One cup – four functions
mix paint
paint
refill the paint
store the paint
With only three components!
SATA RPS consists of 3 components only which means less handling efforts and thus, less expenditure of time.
a cup
a lid
a sieve
No additional components are necessary. There is no other cup system with the same functions but with three components only!
Economical
The cleaning of the cup is not necessary with SATA RPS, thus saving time, cleaning agents and cost. Perfect colour match and perfect paint jobs reduce time and cost intensive rework. And the very few components additionally facilitate the entire work process – simplicity pays.
Adapters
Contrary to other disposable cup systems, SATA RPS does not require any adapter in combination with SATA paint spray guns. Therefore, the spray gun can be easily and reliably cleaned. RPS adapters – For older SATA paint spray guns and spray guns of other manufactures spray gun adapters are available.
BETASEAL™ U-418 speeds installations – eliminates the glass priming step. BETASEAL U-418 provides primerlessto-glass convenience with excellent workability, sag resistance and convenient drive-away times. BETASEAL U-418 is easy to use and does not require heating. It is available in cartridges. Product benefits include: Primerless to auto glass FMVSS crash proven Meets all long-term durability requirements Ready to use – no heating required Applications Structurally bonded or direct glazed automotive glass, such as windshields, backlites, quarter glass and other stationary glass Other uses such as attaching hardware to glass and backfilling to install reveal moldings or other trim BETASEAL U-418 Quick Cure Auto Glass Urethane Adhesive Application details See vehicle manufacturer’s recommendations for additional details. Do not use any other manufacturers’ primers, cleaners or other chemicals in conjunction with any BETASEAL adhesive system Apply at temperatures of 40˚F (4.4˚C) and warmer Physical properties Appearance – black, smooth paste Solids content – 94% Flash point – > 110˚F (43˚C) Weight per volume – 10.1 lbs/gal Specific gravity – 1.2 Sag – none Odor – minimal Tack-free time – 25 minutes after application at 72˚F (22˚C) and 50% RH Working time – 15 minutes at 72˚F (22˚C) and 50% RH Full cure – less than 24 hours at 72˚F (22˚C) and 50% RH
Area of application: Grinds finer for easier sanding. Good adhesion on steel, aluminum, galvanized, fiber glass and different types of plastic. Recoatable with all basecoats and water basecoats.
Carworx 2.1 VOC Bullet is a high production clearcoat system developed for spot repair and one panel repair. This 4:1 mix clearcoat is a 3 coat system that can be sanded and buffed in 20-25 minutes air dry or baked for 5 minutes at 130°F(54.4°C) metal temperature.
It is a 4:1 mix withActivator (#191.101)
Applied in 3 light coats wet-on-wet with no flash times between coats.
Adhesives
6" Velcro Sandpaper
Trim
Two-Stage
Clearcoat
