|Dimensions||14 × 9 × 6 in|
Kit contains 50 disposable lids with 125 micron filters, 50 disposable liners, and 20 sealing plugs. The 125 micron filters are recommended for water borne paint or primer applications. Graduated measurement to 5 1/2 oz when used with with generic mix ratio film insert (mix ratio film inserts are sold separately). For use with part number 16115.
|Dimensions||14 × 9 × 6 in|
High Volume Low Pressure Air Spray Gun (HVLP)
Characteristics : HVLP gravity spray gun for high quality finishes. Specifically designed for car refinishing. The air cap, needle and nozzle are all made of stainless steel and are suitable for use with the latest waterborne paints.
Area of application: Grinds finer for easier sanding. Good adhesion on steel, aluminum, galvanized, fiber glass and different types of plastic. Recoatable with all basecoats and water basecoats.
HARDENER: BESA 201.215.1
Kit contains 50 disposable lids with 200 micron filters, 50 disposable liners, and 20 sealing plugs. The 200 micron filters are recommended for traditional solvent based paint or primer applications. Holds 22 ounces (650 mL).
PPS™ is a complete painting system from 3M™ which produces cleaner jobs, saves on solvent usage and gun cleaning time and can improve operator efficiency by as much as 15%. Specifically designed adapters allow painters to use the PPS™ system with virtually any spray gun.
PPS™ replaces traditional mixing cups and filters and drastically reduces the amount of solvent required for gun cleaning. The liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. It is possible to clean your paint gun with as little as 3 ounces of solvent. With these disposable parts, shops can see a 70% savings in cleaning solvent use — meaning less operator exposure to solvents and reduction in VOCs.
Since PPS™ uses the same cup for mixing and spraying, there less risk of outside contamination, less time spend mixing and cleaning.
With PPS™ your spray gun functions at any angle
Many painters mix more paint than they need to reduce the chance of starving the gun. PPS™ allows painters to spray at any angle without starving the paint gun.
Kit contains 50 disposable lids with 200 micron filters, 50 disposable liners, and 20 sealing plugs. The 200 micron filters are recommended for traditional solvent based paint or primer applications. For use with part number 16001.
For scuffing before applying paint and primer-surfacer. Also used for used car reconditioning. cleaning upholstery, headlines and door pads, chrome and white wall tires. Rinses clean and does not rust. Can be used over and over again.
MRS-771 2.1 V.O.C. Acrylic Lacquer Primer Surfacer-Grey is a premium acrylic lacquer primer surfacer formulated for the most stringent V.O.C. regulations. This primer surfacer must be reduced with the proper Zero V.O.C. reducer to be compliant. MRS-771 has excellent adhesion with superior filling and sanding properties. For optimum performance a compliant self-etching primer or epoxy primer should be applied to bare substrate before applying MRS-771. Packaged in gallons (4 gallons/case)