your trusted source for automotive paint and refinishing
Shopping Cart$85.00
1
PROUDLY CANADIAN
FREE GROUND SHIPPING ON ORDERS OVER $450
View cart “NORTON 31644 2 3/4″ X 16 1/2″ Norgrip P120” has been added to your cart.
Sale!
3M 34442 70mm x 12mm P80 Velcro Cubitron II
Use these 80+ grade sheets for shaping plastic filler, removing paint around damaged area and scratch refinement of bare metal. Built with patented 3M Cubitron™ II precision shaped abrasive grains, these sheet roll abrasives cut faster and last longer than other sandpapers.
These sheet rolls feature our unique kiss-cut scorring technology which enables users to be cleanly and easily converted into multiple sheet-lengths. For maximum dust removal, 3M has added hundreds of small holes which have been purposely arranged in a chevron formation.
The triangular-shaped ceramic grains of Cubitron™ II are electrostatically oriented to form sharp peaks, each acting like an individual cutting tool that slices through paint and body filler, wearing evenly, and providing long life.
Norton BlueFire Body File Sheets come in three different types: Clip-On, PSA and NorGrip. Self-sharpening NorZon grain improves cut rate, minimizes loading, and reduces heat. Tough E-weight latex reinforced paper backing resists tearing. Norton BlueFire is ideal for sanding body filler.
Champagne Magnum is sand paper technology at it’s best. It cuts faster, runs cooler, resists loading better and lasts far longer than any conventional sandpaper.
Premium heat-treated grain extends life and gives a 30 – 50% faster cut rate
Premium B-Weight latex paper backing improves performance, is more flexible and easier disc removal
FEPA P-graded grain achieves a more consistent uniform scratch pattern
Re-designed bond system optimizes grain adhesion and extends cut life
Newest water based stearate No-Fil improves load resistance
No pigment in No-Fil or bond eliminates the risk of color transfer and creates a much stronger bond
Single Sided Black Foam Polishing Pad used to remove compound swirl marks and fine paint surface defects. Flat back design. For use with 3M™ machine polishes and 3M™ Hookit™ back up pads, 05717 or 05718. Proven performer.
SAS Safety Corp. Raven disposable gloves are powder-free 6 mil nitrile, superior puncture and abrasion resistant with a beaded cuff and textured grip. They are latex-free and ambidextrous, coming in a box of 100 gloves by weight.
Manufacturer Information
For over 30 years, SAS Safety Corporation has been providing products and equipment designed to make workplaces safer. We are dedicated to providing quality products that protect and preserve our most valuable resource: people. We offer a complete line of personal protective equipment; eye and face, hand, body, respiratory and hearing protection, as well as first-aid kits, ergonomic, spill control, and traffic safety products. Our customer service staff is just a phone call away to assist companies and individuals looking for effective and cost-efficient safety products.
The 3M™ Organic Vapour/Acid Gas Cartridge/Filter 60923 is NIOSH approved against certain organic vapours, acid gasses and particulates. Use with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.
3M™ Organic Vapour/Acid Gas Cartridge/Filter 60923 P100 helps provide protection against certain organic vapours, acid gasses and particulates in a variety of environments. The cartridge/filter combination may be used for respiratory protection from certain organic vapours, chlorine, hydrogen chloride, sulfur dioxide, hydrogen sulfide, hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepieces. This cartridge/filter is not for use in environments that are Immediately Dangerous to Life or Health (IDLH). Recommended applications for the cartridge/filter include chemical manufacturing, laboratories, petrochemical, and pharmaceuticals. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge/filter selection works for many different applications. This cartridge/filter is commonly used in the following industries: chemicals, general manufacturing, and pharmaceuticals.
NIOSH approved against certain organic vapors, acid gases with P100 particulate filter
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
Wide range of applications reduces inventory needs
To establish cartridge replacement frequency visit: 3M.com/ServiceLifeSoftware
Advanced G3 Liquid is a one-step system that provides a fast cutting action and a high gloss finish. It combines all the reliability and other advantages of G3 Paste with a reduced clean up time when compounding by machine. It provides the user with improved versatility, quality and speed to final finish verses competitive products. AG3 has been tested against all major paint brands and has proven compliant to remove defects from all modern paint systems. Using the product with water will result in maximum performance benefits. – See more at: http://www.farecla.com/automotive/compounding-systems/advanced-g3-liquid-compound#sthash.PtrlmFor.dpuf
BETASEAL™ U-418 speeds installations – eliminates the glass priming step. BETASEAL U-418 provides primerlessto-glass convenience with excellent workability, sag resistance and convenient drive-away times. BETASEAL U-418 is easy to use and does not require heating. It is available in cartridges. Product benefits include: Primerless to auto glass FMVSS crash proven Meets all long-term durability requirements Ready to use – no heating required Applications Structurally bonded or direct glazed automotive glass, such as windshields, backlites, quarter glass and other stationary glass Other uses such as attaching hardware to glass and backfilling to install reveal moldings or other trim BETASEAL U-418 Quick Cure Auto Glass Urethane Adhesive Application details See vehicle manufacturer’s recommendations for additional details. Do not use any other manufacturers’ primers, cleaners or other chemicals in conjunction with any BETASEAL adhesive system Apply at temperatures of 40˚F (4.4˚C) and warmer Physical properties Appearance – black, smooth paste Solids content – 94% Flash point – > 110˚F (43˚C) Weight per volume – 10.1 lbs/gal Specific gravity – 1.2 Sag – none Odor – minimal Tack-free time – 25 minutes after application at 72˚F (22˚C) and 50% RH Working time – 15 minutes at 72˚F (22˚C) and 50% RH Full cure – less than 24 hours at 72˚F (22˚C) and 50% RH
For scuffing before applying paint and primer-surfacer. Also used for used car reconditioning. cleaning upholstery, headlines and door pads, chrome and white wall tires. Rinses clean and does not rust. Can be used over and over again.
Abrasives
