your trusted source for automotive paint and refinishing
Shopping Cart$0.00
0
PROUDLY CANADIAN
FREE GROUND SHIPPING ON ORDERS OVER $450
Sale!
3M 6004 AMMONIA METHYLAMINE CARTRIDGE
The 3M™ Ammonia Methylamine Cartridge 6004 is NIOSH approved against ammonia and methylamine. Use with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.
Use the 3M™ Ammonia Methylamine Cartridge 6004 in a variety of applications including agriculture, chemical manufacturing, laboratories and the food industry. When properly fitted, helps provide respiratory protection from ammonia and methylamine at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Not for use in environments that are Immediately Dangerous to Life or Health (IDLH).
NIOSH approved for protection against ammonia and methylamine
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
To establish cartridge replacement frequency visit: 3M.com/ServiceLifeSoftware
The 3M™ Organic Vapour/Acid Gas Cartridge/Filter 60923 is NIOSH approved against certain organic vapours, acid gasses and particulates. Use with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.
3M™ Organic Vapour/Acid Gas Cartridge/Filter 60923 P100 helps provide protection against certain organic vapours, acid gasses and particulates in a variety of environments. The cartridge/filter combination may be used for respiratory protection from certain organic vapours, chlorine, hydrogen chloride, sulfur dioxide, hydrogen sulfide, hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepieces. This cartridge/filter is not for use in environments that are Immediately Dangerous to Life or Health (IDLH). Recommended applications for the cartridge/filter include chemical manufacturing, laboratories, petrochemical, and pharmaceuticals. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge/filter selection works for many different applications. This cartridge/filter is commonly used in the following industries: chemicals, general manufacturing, and pharmaceuticals.
NIOSH approved against certain organic vapors, acid gases with P100 particulate filter
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
Wide range of applications reduces inventory needs
To establish cartridge replacement frequency visit: 3M.com/ServiceLifeSoftware
Automotive Refinish Masking Tape is designed for masking before painting — it bends and stretches to follow curved body lines with no edge lifting, leaves sharp paint lines, removes easily with no adhesive transfer. Waterborne paint compatible.
USCRed Glazing Putty. A one component, fast drying glazing putty with an extra fine texture for filling pinholes, scratches and dimples on bare metal and hardened plastic fibers.
Best under lacquer, acrylic and synthetic finishes
Hardening agent for use with all polyester resins and gel coats. Plastic squeeze tube has graduated measure for mixing convenience. Use this Methyl Ethyl Ketone Peroxide catalyst according to the resin/gel coat label directions
MSV-25 Low VOC Quick Cure Clearcoat is designed for quick repairs over a wide temperature range in areas that require a 2.1 VOC Clearcoat. This product is intended for small, 1-2 panel size jobs. MSV-25 Low VOC Quick Cure Clearcoat can be polished, or delivered same day without baking.
Large panel adhesive is a strong, multi-use, glass-sphere filled epoxy that provides a superior bond. Use for bonding metal, fiberglass, SMC and aluminum. Glass-spheres assist you in maintaining proper bond line thickness. Work Time: 75 – 85 minutes. Unclamp Time: 4 1⁄2 hrs
Mask Filters
Reviews
There are no reviews yet.