your trusted source for automotive paint and refinishing
Shopping Cart$55.87
1
PROUDLY CANADIAN
FREE GROUND SHIPPING ON ORDERS OVER $450
View cart “3M 02037 500 Wet 9X11” has been added to your cart.
Sale!
3M 60921 ORGANIC VAPOR CARTRIDGE/FILTER, P100
The 3M™ Organic Vapour Cartridge/Filter 60921 is NIOSH approved against certain organic vapours and particulates. Use with 3M™ Half and Full Facepiece, 6000, 3M™ Half and Full Facepiece, 7000, and 3M™ Half and Full Facepiece, FF-400 Series with bayonet filter holders.
3M™ Organic Vapour Cartridge/Filter 60921 P100 helps provide protection against certain organic vapours and particulates in a variety of environments. The cartridge/filter combination may be used for respiratory protection from certain organic vapours and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepieces. This cartridge/filter is not for use in environments that are Immediately Dangerous to Life or Health (IDLH). Recommended applications for the cartridge/filter include chemical clean-up, chemical compounding, chemical transfer, laboratories, and pesticide application. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: agriculture, chemicals, mining, oil and gas, pharmaceuticals, and primary metals.
NIOSH approved against certain organic vapours with P100 particulate filter
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
To establish cartridge replacement frequency visit: 3M.com/ServiceLifeSoftware
MSV-21 2.1 VOC Urethane Clearcoat is a low VOC clear designed for general refinish work. MSV-21 is an easy to apply medium solids clear. MSV-21 2.1 VOC Urethane Clearcoat is versatile and delivers a productive, high gloss finish.
Hardener
• MHV-21F 2.1 VOC Fast Hardener • MHV-21N 2.1 VOC Normal Hardener • MHV-21S 2.1 VOC Slow Hardener
Aggressive, open-web disc for cleaning welds and removing rust or paint
The Scotch-Brite™ 3M™ Roloc™ + clean and strip disc aggressively removes paint and rust from seams, door jambs, drip moldings, pinchwelds and other difficult-to-reach areas. Its three-dimensional abrasive web conforms to most work pieces, offering a safer process than with wire bristle tools.
Make tough jobs easier. Scotch-Brite™ Discs can help you achieve a burr-free, paintable finish in fewer steps without damaging the base material. The non-woven, open-web, durable construction helps to resist loading and greatly increases the life of the disc. As a result, you will not have to change it as often.
Suggested Applications
Ideal for cleaning welds and removing rust or paint
Scotch® Performance Green Masking Tape 233+, 26338 is a highly-conformable tape that provides the best adhesive transfer resistance, hugs curves, contours and provides outstanding paint lines. Goes on quickly and easily, sticks at a touch and stays put. Perfectly balanced to give outstanding masking results.
Trim Black is an acrylic coating formulated to match the OEM finish on automotive trim components. For use on plastic, aluminum, steel, stainless steel and chrome.
Designed specifically for automotive aftermarket applications with 3M Masking Tapes and 3M Masking Equipment
Flexible and pliable to cover irregular surfaces for higher productivity
Tightly bonded construction makes for little or no lint or fibers
Specially treated to resist bleed-through of solvents, urethanes, base and clear coats
Heat resistant – a sheet can withstand a 400°F baking cycle for 30 minutes
Our 3M™ White Masking Paper is specially treated to resist heat from paint booths and penetration by paint solvents, urethanes, base coats and clear coats – ideal for collision repair. It is tightly bonded, virtually eliminating lint or fiber contamination that can occur using paper masking. And its thin but conformable construction makes it easy to handle, boosting shop efficiency.
Available in a range of sizes
How Our Masking Paper Improves Your Collision Repair Designed specifically for automotive aftermarket applications, our 3M™ White Masking Paper (PDF, 34 Kb) helps you work more efficiently during a full range of masking jobs large and small. It is durable yet conformable and is available in a variety of sizes, making it easy to handle for protecting even irregular vehicle surfaces from paint overspray. This paper is specially treated to resist penetration by paint solvents, base coats, clear coats and urethanes, reducing rework caused by bleed-through. It also withstands heat — the masking paper can hold up during a bake cycle up to 400°F (204°C) for 30 minutes, making it suitable for use in paint booths.
Designed Specifically for Automotive Aftermarket This 3M™ White Masking Paper brings the science of 3M directly to auto body and collision repair, helping professionals work more efficiently and achieve their best results. Its design includes high tolerance to heat, resistance to chemical bleed-through and little or no loose lint or fibers — yet it still affords the easy, fast conformability of paper for truly effective masking.
3M™ Petrifilm™ Salmonella Express Confirmation Discs are part of the 3M™ Petrifilm™ Salmonella Express System, designed to provide fast, accurate qualitative detection and biochemical confirmation of Salmonella in 44 hours.
The 3M™ Petrifilm SALX System consists of an unique medium for the recovery and growth of Salmonella species, 3M™ Petrifilm™ Salmonella Express Plate that provides presumptive results and the 3M™ Petrifilm™ Salmonella Express Confirmation Disc for a biochemical confirmation. This system utilizes 3M Food Safety’s Petrifilm technology, an industry standard, and delivers an all-in-one test and biochemical confirmation method in as little as 44 hours .The 3M™ Petrifilm™ Salmonella Express System has been evaluated against defined requirements using scientific rigor to achieve AOAC® Performance TestedSM (Certificate #061301) and AOAC® Official Method of AnalysisSM (#2014.01).
Reviews
There are no reviews yet.