Additional information
Weight | 1.78 lbs |
---|---|
Dimensions | 7 × 7 × 5 in |
Scotch-Brite™ Roloc™ Coating Removal Disc 07461 features a tough, open virtually load resistant web that makes surface preparation fast and easy. Great for removal of undercoatings, stone guards, seam sealers and rust. Works well under hood webs, in truck beds, door jambs, under carriage and wheel wells.
$11.24
In StockWeight | 1.78 lbs |
---|---|
Dimensions | 7 × 7 × 5 in |
Single Sided Black Foam Polishing Pad used to remove compound swirl marks and fine paint surface defects. Flat back design. For use with 3M™ machine polishes and 3M™ Hookit™ back up pads, 05717 or 05718. Proven performer.
2.1 VOC Hardener – Normal for Matrix MSV-21 2.1 VOC Clearcoat
Dafco Filtration Group’s fiberglass arrestor media is a dry overspray collector with a scrim backing.
The 2 1/2 ” thick, graduated density media allows proper penetration and paint loading with the scrim backing enhancing the efficiency.
Area of application: Grinds finer for easier sanding. Good adhesion on steel, aluminum, galvanized, fiber glass and different types of plastic. Recoatable with all basecoats and water basecoats.
HARDENER: BESA 201.215.1
An economical masking tape designed for production shops. Crepe backing, will not leave any residue when removed and temperature stable up to 80°C (176°F).
48 ROLLS/CASE
Scotch® Performance Green Masking Tape 233+, 26340 is a highly-conformable tape that provides the best adhesive transfer resistance, hugs curves, contours and provides outstanding paint lines. Goes on quickly and easily, sticks at a touch and stays put.
12 ROLLS/CASE
Use ultra fine hand pad for light cleaning, finishing of metal, plastic, composite and wood surfaces. For final sanding of primer-surfacer. Rinses clean, will not rust an can be used over and over again.
3M™ Dry Guide Coat and Applicator Kit is a dry powder with applicator used to highlight surface imperfections and sand scratches prior to finishing with abrasives. When sanding polyester filler, it ensures the end result is flat with no ripples and that the body styling lines and contours are straight and correct. It also ensures the total primed area is sanded prior to top coating. It requires no masking and there is no dry time involved. It can also be used for both wet and dry sanding and contains no solvents. 3M™ Dry Guide Coat and Applicator Kit contains an applicator pad.