Additional information
Weight | 4.84 lbs |
---|---|
Dimensions | 7 × 7 × 4 in |
Area of Application:
Especially easy to sand, two-component polyester filling putty. To be applied in order to equalize or close possible pin holes, small irregularities, small paint damages or scratches on the body of cars, vehicles or machines. Recommended also to be used as a putty and dowel setting material as well as an adhesive for iron, wood, stone and porcelain.
Characteristic Features:
– adhesive on iron, steel, aluminum, galvanized substrates and glass fiber
$32.89
In StockWeight | 4.84 lbs |
---|---|
Dimensions | 7 × 7 × 4 in |
Features:
· 30% – 50% gains in cut rate, far less loading on the job and greater worklife.
· Entirely new level of work speed is attainable.
· Agressive sanding action isn`t easily dulled.
· New anti-loading agent which actually throws dust from the grain as it cuts.
· New latex-reinforced backing can withstand whatever job torture you throw at it.
· Unparalled speed, scratch consistency and an overall quality of finish never before achieved.
Scotch® Performance Green Masking Tape 233+, 26334 is a highly-conformable tape that provides the best adhesive transfer resistance, hugs curves, contours and provides outstanding paint lines. Goes on quickly and easily, sticks at a touch and stays put. Perfectly balanced to give outstanding masking results.
48 ROLLS/CASE
Use these 40+ grade sheets for stripping paint to metal, shaping and sanding plastic filler. Built with patented 3M Cubitron™ II precision shaped abrasive grains, these sheet roll abrasives cut faster and last longer than other sandpapers.
These sheet rolls feature our unique kiss-cut scorring technology which enables users to be cleanly and easily converted into multiple sheet-lengths. For maximum dust removal, 3M has added hundreds of small holes which have been purposely arranged in a chevron formation.
The triangular-shaped ceramic grains of Cubitron™ II are electrostatically oriented to form sharp peaks, each acting like an individual cutting tool that slices through paint and body filler, wearing evenly, and providing long life.
70 mm x 8 m
A flexible polyester glazing putty designed for spot filling and skim coating over repair areas on flexible bumpers and plastic parts. Its flowable viscosity is ideal for filling minor imperfections such as sand scratches, nicks, dings and gouges. Poly-Flex™ may also be used to skim coat over repair areas or large surface areas that have the original paint still intact. Blue cream hardener included.
Features :
3M™ Rigid Pillar Foam is a two part urethane which foams in place to fill posts, pillars, and automotive body cavities with exceptional ease and consistent quality. This foam is easily to apply with a range of manual and pneumatic 3M applicators.
Taff-Guard two layer intake panels are constructed using two synthetic layers of media sealed over a metal wire frame. The first layer, dry and white, acts as a pre-filter to remove the medium and large particles. The second layer, green with an adhesive, removes and retains the smaller particles.
Typically, this intake filter is installed in the paint booth doors and/or ceilings. However, these paint booth filters can be used in any standard HVAC application as well.
100% synthetic material with tack layer to trap dirt particles
Low resistance to air flow which results in minimal energy costs
Will not absorb moisture or humidity
Prefilter for multistage units
Paint Booth, Spray Booth and Auto body filter
Standard HVAC applications