CARWORX 137.682
BEDROCK URETHANE COATING (PART A)
Area of Application:
Ideal as a truck bedliner, as well as on trailers, boats and R.V.’s.
Characteristic Features:
Adheres to metal, wood, plastics and concrete. Drive away in 3 hours. May be sprayed, rolled or brushed on.
*Click on MSDS link for Part A of Bedrock. Visit 137.682 Part B for access to Part B MSDS.
$94.72
In StockRECENTLY VIEWED
- 6" Velcro Sanding Pads
NORTON 23614
Bluemag Long File 80G VelcroFeatures:
- 2 3/4 In x 16 1/2 In – 80E Grit.
- Roughest, toughest coarse grit ever made.
- Cuts faster and cooler and loads less.
- Latex-reinforced E-weight backing is so indestructible, it won`t edge chip, tear or curl.
- Most consistent scratch possible.
- Cutting edges are uniformly aligned to point straight up, for ultra-sharp sanding action.
- Ability to self-sharpen on the job and able to blast through work faster, with a much higher-quality scratch.
(0 reviews) - 6" Stick-On Sandpaper
NORTON 31471
6″ P400B PSA A275 Chamag DiscsChampagne Magnum is sand paper technology at it’s best. It cuts faster, runs cooler, resists loading better and lasts far longer than any conventional sandpaper.
- Premium heat-treated grain extends life and gives a 30 – 50% faster cut rate
- Premium B-Weight latex paper backing improves performance, is more flexible and easier disc removal
- FEPA P-graded grain achieves a more consistent uniform scratch pattern
- Re-designed bond system optimizes grain adhesion and extends cut life
- Newest water based stearate No-Fil improves load resistance
- No pigment in No-Fil or bond eliminates the risk of color transfer and creates a much stronger bond
(0 reviews) - Wholesale Automotive Paint Booth Filters
TAFF PB2L-2020
PAINT BOOTH TACKIFIED PANEL FILTER 20X20 (24/CS)DESCRIPTION:
Taff-Guard two layer intake panels are constructed using two synthetic layers of media sealed over a metal wire frame. The first layer, dry and white, acts as a pre-filter to remove the medium and large particles. The second layer, green with an adhesive, removes and retains the smaller particles.
Typically, this intake filter is installed in the paint booth doors and/or ceilings. However, these paint booth filters can be used in any standard HVAC application as well.
PRODUCT OVERVIEW:
100% synthetic material with tack layer to trap dirt particles
Low resistance to air flow which results in minimal energy costs
Will not absorb moisture or humidity
IDEAL APPLICATIONS:
Prefilter for multistage units
Paint Booth, Spray Booth and Auto body filter
Standard HVAC applications
(0 reviews) - 6" Velcro Sanding Pads
CARWORX 142.610
6″ OPTIMUM GOLD VELCRO (P400)OPTIMUM GOLD VELCRO DISC is a premium quality sandpaper with an excellent cutting performance and a longer lasting life. Ideal for contour sanding.
100 UNITS/BOX
(0 reviews) - Wholesale Auto Body Masking Paper
3M 06540
36″ WHITE MASKING PAPER (750FT)- Designed specifically for automotive aftermarket applications with 3M Masking Tapes and 3M Masking Equipment
- Flexible and pliable to cover irregular surfaces for higher productivity
- Tightly bonded construction makes for little or no lint or fibers
- Specially treated to resist bleed-through of solvents, urethanes, base and clear coats
- Heat resistant – a sheet can withstand a 400°F baking cycle for 30 minutes
Our 3M™ White Masking Paper is specially treated to resist heat from paint booths and penetration by paint solvents, urethanes, base coats and clear coats – ideal for collision repair. It is tightly bonded, virtually eliminating lint or fiber contamination that can occur using paper masking. And its thin but conformable construction makes it easy to handle, boosting shop efficiency.
Available in a range of sizesHow Our Masking Paper Improves Your Collision Repair
Designed specifically for automotive aftermarket applications, our 3M™ White Masking Paper (PDF, 34 Kb) helps you work more efficiently during a full range of masking jobs large and small. It is durable yet conformable and is available in a variety of sizes, making it easy to handle for protecting even irregular vehicle surfaces from paint overspray. This paper is specially treated to resist penetration by paint solvents, base coats, clear coats and urethanes, reducing rework caused by bleed-through. It also withstands heat — the masking paper can hold up during a bake cycle up to 400°F (204°C) for 30 minutes, making it suitable for use in paint booths.Designed Specifically for Automotive Aftermarket
This 3M™ White Masking Paper brings the science of 3M directly to auto body and collision repair, helping professionals work more efficiently and achieve their best results. Its design includes high tolerance to heat, resistance to chemical bleed-through and little or no loose lint or fibers — yet it still affords the easy, fast conformability of paper for truly effective masking.(0 reviews) - Abrasives
3M 36525
2″ 40GRIT ROLOC GREEN CORPS DISC- Small diameter sizes allow for grinding in hard-to-reach places
- Tough, coarse aluminum oxide abrasive stays sharper longer
- Versatile Roloc™ attachment system works with any 1/4” drill or air tool
- Allows for quick twist-on, twist-off disc changes for lower labor costs
(0 reviews) - Foam
NORTON 70735
Foam Masking Tape 13mm X 50mEasy-to-use, time-saving products to mask door jambs and other apertures like hood and deck lid openings that need to be sealed during the painting process. The Premium Foam Masking Tape features a semi-split design and offset adhesive to ensure a soft paint edge.
(0 reviews) - Abrasives
3M 01398
2″ Roloc 24G 25/BoxBlack button. Generally used for hard to reach areas in paint, rust, and weld removal. Handy quick change tool for disc grinding which fits any standard 1/4 in drill or air tool.
(0 reviews)