Additional information
Weight | 10 lbs |
---|---|
Dimensions | 51 × 54 × 64 in |
Dafco Filtration Group’s fiberglass arrestor media is a dry overspray collector with a scrim backing.
The 2 1/2 ” thick, graduated density media allows proper penetration and paint loading with the scrim backing enhancing the efficiency.
$131.18
In StockWeight | 10 lbs |
---|---|
Dimensions | 51 × 54 × 64 in |
Champagne Magnum is sand paper technology at it’s best. It cuts faster, runs cooler, resists loading better and lasts far longer than any conventional sandpaper.
*Hardener must be ordered separately*
Restores vehicles to OEM specifications to provide original quiet ride. Self-adhering, sound deadening panels designed to reduce noise levels in cars and trucks. Cuts easily with a razor blade, knife or scissors. Can be heated up to 300 degrees F to conform to any irregular surface. Permanent bonding once affixed. Acts as a waterproof barrier. #116 for doors, trunks and fenders, and #117 is extra strength for floorboards.
A two component primer surfacer that has exceptional filling capabilities and patented 4:1 mix ratio technology. It is ideal for holding down troublesome repairs on fiberglass and SMC. Super Build 4:1 passes 500 hours in salt spray tests (ASTM B117) and can be applied over properly sanded and cleaned bare metal. It is compatible with waterborne paint systems and VOC compliant. Must be catalyzed with 733 4:1 Polyester Primer Catalyst or 734 Fast Polyester Primer Catalyst only!
Scotch® Performance Green Masking Tape 233+, 26334 is a highly-conformable tape that provides the best adhesive transfer resistance, hugs curves, contours and provides outstanding paint lines. Goes on quickly and easily, sticks at a touch and stays put. Perfectly balanced to give outstanding masking results.
48 ROLLS/CASE
Taff-Guard two layer intake panels are constructed using two synthetic layers of media sealed over a metal wire frame. The first layer, dry and white, acts as a pre-filter to remove the medium and large particles. The second layer, green with an adhesive, removes and retains the smaller particles.
Typically, this intake filter is installed in the paint booth doors and/or ceilings. However, these paint booth filters can be used in any standard HVAC application as well.
100% synthetic material with tack layer to trap dirt particles
Low resistance to air flow which results in minimal energy costs
Will not absorb moisture or humidity
Prefilter for multistage units
Paint Booth, Spray Booth and Auto body filter
Standard HVAC applications