Taff-Guard two layer intake panels are constructed using two synthetic layers of media sealed over a metal wire frame. The first layer, dry and white, acts as a pre-filter to remove the medium and large particles. The second layer, green with an adhesive, removes and retains the smaller particles.
Typically, this intake filter is installed in the paint booth doors and/or ceilings. However, these paint booth filters can be used in any standard HVAC application as well.
PRODUCT OVERVIEW:
100% synthetic material with tack layer to trap dirt particles
Low resistance to air flow which results in minimal energy costs
Taff-Guard two layer intake panels are constructed using two synthetic layers of media sealed over a metal wire frame. The first layer, dry and white, acts as a pre-filter to remove the medium and large particles. The second layer, green with an adhesive, removes and retains the smaller particles.
Typically, this intake filter is installed in the paint booth doors and/or ceilings. However, these paint booth filters can be used in any standard HVAC application as well.
PRODUCT OVERVIEW:
100% synthetic material with tack layer to trap dirt particles
Low resistance to air flow which results in minimal energy costs
ANDREAE Standard Filters are used in the exhaust of paint booths for over-spray collection.
The front V-shaped wall prevents over-spray bounce back and migration. The deeper V-shape of the back wall is the paint holding pocket.
The exhaust holes are misaligned to divert the paint laden airflow to the holding pocket, where the paint is captured, while maintaining a constant flow during the loading phase.
PRODUCT OVERVIEW:
Lasts 3 x 5 times longer than poly, fiberglass or mesh media
Captures any wet solid or liquid particles
Standard & high efficiency options
V shape wall prevents over spray and bounce back migration
BETASEAL™ U-418 speeds installations – eliminates the glass priming step. BETASEAL U-418 provides primerlessto-glass convenience with excellent workability, sag resistance and convenient drive-away times. BETASEAL U-418 is easy to use and does not require heating. It is available in cartridges. Product benefits include: Primerless to auto glass FMVSS crash proven Meets all long-term durability requirements Ready to use – no heating required Applications Structurally bonded or direct glazed automotive glass, such as windshields, backlites, quarter glass and other stationary glass Other uses such as attaching hardware to glass and backfilling to install reveal moldings or other trim BETASEAL U-418 Quick Cure Auto Glass Urethane Adhesive Application details See vehicle manufacturer’s recommendations for additional details. Do not use any other manufacturers’ primers, cleaners or other chemicals in conjunction with any BETASEAL adhesive system Apply at temperatures of 40˚F (4.4˚C) and warmer Physical properties Appearance – black, smooth paste Solids content – 94% Flash point – > 110˚F (43˚C) Weight per volume – 10.1 lbs/gal Specific gravity – 1.2 Sag – none Odor – minimal Tack-free time – 25 minutes after application at 72˚F (22˚C) and 50% RH Working time – 15 minutes at 72˚F (22˚C) and 50% RH Full cure – less than 24 hours at 72˚F (22˚C) and 50% RH
Produces a swirl free finish even on black vehicles. Quickly and effectively removes fine machine polish swirls. Outstanding finish. The unique formula eliminates swirl marks and produces a high gloss finish, even on the most difficult dark colored vehicles. Good handling, easy cleanup. The Perfect-It brand means this is 3M’s highest performing machine polish.
High Performance Machine Polish. Quickly and effectively removes compound swirl marks and produces an outstanding finish. Good handling, easy cleanup. The Perfect-It brand means this is 3M`s highest performing machine polish.
An advanced, clog-free, lightweight body filler for today’s high tech metals. Formulated with ZNX-7® for superior adhesion to galvanized steel, bare steel and aluminum. Part of the MetalWorks® System that honors the OEM corrosion warranty. Contains Hattonite™ for effortless sanding. Blue cream hardener included
Optimal Cut is specially formulated with extended running time to enable the operator to achieve the enhanced cutting action with no drying out, to deliver a uniqu a depth of gloss finish.
Designed for use in grinding, sanding and buffing applications in the automotive aftermarket. Lightweight, two-strap filtering facepiece respirators with an adjustable noseclip and new braided headstraps, this respirator helps provide excellent protection.
Wholesale Automotive Paint Booth Filters
Reviews
There are no reviews yet.