Additional information
Weight | 1 lbs |
---|---|
Dimensions | 12 × 2 × 2 in |
BETASEAL™ U-418 speeds installations – eliminates the glass priming step. BETASEAL U-418 provides primerlessto-glass convenience with excellent workability, sag resistance and convenient drive-away times. BETASEAL U-418 is easy to use and does not require heating. It is available in cartridges. Product benefits include: Primerless to auto glass FMVSS crash proven Meets all long-term durability requirements Ready to use – no heating required Applications Structurally bonded or direct glazed automotive glass, such as windshields, backlites, quarter glass and other stationary glass Other uses such as attaching hardware to glass and backfilling to install reveal moldings or other trim BETASEAL U-418 Quick Cure Auto Glass Urethane Adhesive Application details See vehicle manufacturer’s recommendations for additional details. Do not use any other manufacturers’ primers, cleaners or other chemicals in conjunction with any BETASEAL adhesive system Apply at temperatures of 40˚F (4.4˚C) and warmer Physical properties Appearance – black, smooth paste Solids content – 94% Flash point – > 110˚F (43˚C) Weight per volume – 10.1 lbs/gal Specific gravity – 1.2 Sag – none Odor – minimal Tack-free time – 25 minutes after application at 72˚F (22˚C) and 50% RH Working time – 15 minutes at 72˚F (22˚C) and 50% RH Full cure – less than 24 hours at 72˚F (22˚C) and 50% RH
$18.53
In StockWeight | 1 lbs |
---|---|
Dimensions | 12 × 2 × 2 in |
DESCRIPTION:
Carworx 2.1 VOC Bullet is a high production clearcoat system developed for spot repair and one panel repair. This 4:1 mix clearcoat is a 3 coat system that can be sanded and buffed in 20-25 minutes air dry or baked for 5 minutes at 130°F(54.4°C) metal temperature.
It is a 4:1 mix withActivator (#191.101)
Applied in 3 light coats wet-on-wet with no flash times between coats.
*Hardener must be ordered separately*
100% Bleached Cotton Gauze Substrate
• Soft cotton mesh material contours to surface shapes.
• Completely removes surface particulates without leaving harmful residue.
• Wax and Silicone-Free.
• Size: 18″ x 36″.
3M™ Dry Guide Coat and Applicator Kit is a dry powder with applicator used to highlight surface imperfections and sand scratches prior to finishing with abrasives. When sanding polyester filler, it ensures the end result is flat with no ripples and that the body styling lines and contours are straight and correct. It also ensures the total primed area is sanded prior to top coating. It requires no masking and there is no dry time involved. It can also be used for both wet and dry sanding and contains no solvents. 3M™ Dry Guide Coat and Applicator Kit contains an applicator pad.
2.1 VOC Hardener – Normal for Matrix MSV-21 2.1 VOC Clearcoat