Additional information
Weight | 1 lbs |
---|---|
Dimensions | 12 × 2 × 2 in |
BETASEAL™ U-418 speeds installations – eliminates the glass priming step. BETASEAL U-418 provides primerlessto-glass convenience with excellent workability, sag resistance and convenient drive-away times. BETASEAL U-418 is easy to use and does not require heating. It is available in cartridges. Product benefits include: Primerless to auto glass FMVSS crash proven Meets all long-term durability requirements Ready to use – no heating required Applications Structurally bonded or direct glazed automotive glass, such as windshields, backlites, quarter glass and other stationary glass Other uses such as attaching hardware to glass and backfilling to install reveal moldings or other trim BETASEAL U-418 Quick Cure Auto Glass Urethane Adhesive Application details See vehicle manufacturer’s recommendations for additional details. Do not use any other manufacturers’ primers, cleaners or other chemicals in conjunction with any BETASEAL adhesive system Apply at temperatures of 40˚F (4.4˚C) and warmer Physical properties Appearance – black, smooth paste Solids content – 94% Flash point – > 110˚F (43˚C) Weight per volume – 10.1 lbs/gal Specific gravity – 1.2 Sag – none Odor – minimal Tack-free time – 25 minutes after application at 72˚F (22˚C) and 50% RH Working time – 15 minutes at 72˚F (22˚C) and 50% RH Full cure – less than 24 hours at 72˚F (22˚C) and 50% RH
$18.53
In StockWeight | 1 lbs |
---|---|
Dimensions | 12 × 2 × 2 in |
DESCRIPTION:
Carworx 2.1 VOC Bullet is a high production clearcoat system developed for spot repair and one panel repair. This 4:1 mix clearcoat is a 3 coat system that can be sanded and buffed in 20-25 minutes air dry or baked for 5 minutes at 130°F(54.4°C) metal temperature.
It is a 4:1 mix withActivator (#191.101)
Applied in 3 light coats wet-on-wet with no flash times between coats.
*Hardener must be ordered separately*
High performance strip abrasive for coarse, medium and fine sanding of polyester putty filler and paint materials. It has a dust repellent coating.
High performance abrasive for machine sanding surfaces. Stands out because of its good initial abrasiveness, its high durability and the very fine finish in higher grits.
Roll : 70 mm x 50 m
2.1 VOC Hardener – Normal for Matrix MSV-21 2.1 VOC Clearcoat
Area of application : Professional masking tape for paint shops. Thin backing. Waterproof and temperature stable up to 120 ° C (284 ° F).
24 ROLLS/CASE
Features:
· 30% – 50% gains in cut rate, far less loading on the job and greater worklife.
· Entirely new level of work speed is attainable.
· Agressive sanding action isn`t easily dulled.
· New anti-loading agent which actually throws dust from the grain as it cuts.
· New latex-reinforced backing can withstand whatever job torture you throw at it.
· Unparalled speed, scratch consistency and an overall quality of finish never before achieved.
3M™ Automotive Acrylic Plus Attachment Tape 06386 is a .045-inch thick, medium-density black foam tape with high performance acrylic adhesives on both sides and a red release liner.
Acrylic Plus Attachment Tapes are OEM approved and are stronger, higher performing, high stress handling products than other automotive attachment tapes. Typical application areas for 06386 include body side moldings, claddings, rocker panel trim, wheel flares, bumper time and other exterior and interior autmotive trim components.