your trusted source for automotive paint and refinishing
Shopping Cart$5,336.26
65
PROUDLY CANADIAN
FREE GROUND SHIPPING ON ORDERS OVER $450
View cart “FARECLA G3 COMPOUND LIQUID 1L” has been added to your cart.
Sale!
FARECLA G3F-101 FINE FINISHING COMPOUND
PRODUCT OVERVIEW:
Farecla G3 Fine Finishing Polish, 1 kg/1 Liter (G3F101/00141) offers rapid removal of minor surface defects and swirl marks from all modern paint systems and is excellent on darker colors.
Fast scratch removal permanently removes P3000 and finer sanding marks and restores gloss from lightly oxidized paint work and dull surfaces leaving a brilliant high gloss finish. Dry use and clean to use results in easy clean up, minimal splatter and dusting.
G3 Fine is ideally applied using a Farecla G Mop Finishing Black Foam or Lambswool buff pads which was engineered in tandem with the compound to provide optimum performance or similar soft finishing pad or by hand.
Designed for use on Medium Solids (MS), High Solids (HS) and Ultra High Solids (UHS) paints and Scratch Resistant Clears.
Advanced G3 Liquid is a one-step system that provides a fast cutting action and a high gloss finish. It combines all the reliability and other advantages of G3 Paste with a reduced clean up time when compounding by machine. It provides the user with improved versatility, quality and speed to final finish verses competitive products. AG3 has been tested against all major paint brands and has proven compliant to remove defects from all modern paint systems. Using the product with water will result in maximum performance benefits. – See more at: http://www.farecla.com/automotive/compounding-systems/advanced-g3-liquid-compound#sthash.PtrlmFor.dpuf
Optimal Cut is specially formulated with extended running time to enable the operator to achieve the enhanced cutting action with no drying out, to deliver a uniqu a depth of gloss finish.
3M™ Dry Guide Coat and Applicator Kit is a dry powder with applicator used to highlight surface imperfections and sand scratches prior to finishing with abrasives. When sanding polyester filler, it ensures the end result is flat with no ripples and that the body styling lines and contours are straight and correct. It also ensures the total primed area is sanded prior to top coating. It requires no masking and there is no dry time involved. It can also be used for both wet and dry sanding and contains no solvents. 3M™ Dry Guide Coat and Applicator Kit contains an applicator pad.
Norton Multi-Air Cyclonic is perfect for refinishing any job, especially those that require an extremely durable abrasive that cuts quicker, cuts cooler, and lasts longer without generating heat. Our engineered ceramic grain is the perfect abrasive for any job, including those with scratch-resistant clears and E-coats, composites and aluminum. Its versatility eliminates the need for additional specialty abrasives.
FEATURES & BENEFITS
• Norton SG ceramic grain for quicker/cooler cut with better longevity for superior cut on abrasion-resistant paints and clears
• Unique fiber-reinforced latex/paper backing is flexible and has easy removal with maximum tear resistance for increased durability
• Water-based stearate (No-Fil) improves load resistance and extends life
Superfine ranges from grade 500 to 600. Flexible foam pad enables user to sand hard-to-reach areas such as headlight openings, around door handles, door jambs, etc. Helps to eliminate finger marks and can be used wet or dry.
3M™ Automotive Acrylic Plus Attachment Tape 06382 is a .045-inch thick, medium-density, black acrylic foam tape with high performance acrylic adhesives on both sides and a red release liner.
Acrylic Plus Attachment Tapes are OEM approved and are stronger, higher performing, high stress handling products than other automotive attachment tapes. Typical applications include body side moldings, rocker panel moldings, claddings, wheel flares, bumper trim and other exterior and interior automotive trim components.
Use ultra fine hand pad for light cleaning, finishing of metal, plastic, composite and wood surfaces. For final sanding of primer-surfacer. Rinses clean, will not rust an can be used over and over again.
Reduce your cycle time with these great 3 in 1 Primers. Great for use over metal, aluminum, SMC, plastics and fiberglass. Also works great over body filler and other sanded areas prior to painting. This primer offers great flexibility and film build. Sandable in as little as 15 minutes and paintable in as little as 30 minutes.
Stock: SAPB/24025 Black 454g Stock: SAPG/24023 Grey 454g Stock: SAPW/24028 White 454g
Car Polishing Pads and Compounds
Reviews
There are no reviews yet.