Additional information
Weight | 4 lbs |
---|---|
Dimensions | 7 × 4 × 3 in |
The 1002 Heavy Weight Studs are designed for heavy pulling applications. They are 2.6 mm copper coated and have been designed for easy welding and easy removal after the pulling is complete. The shafts are strong yet flexible. This stud was designed to be used with the 1080 Uni-Clamp for making heavy structural pulls.
$33.47
In StockWeight | 4 lbs |
---|---|
Dimensions | 7 × 4 × 3 in |
Buffing foam pads with a center ring back and hex face pattern to help dissipate polish or compounds evenly, minimizing grabbing and reducing heat.
DESCRIPTION:
Carworx 2.1 VOC Bullet is a high production clearcoat system developed for spot repair and one panel repair. This 4:1 mix clearcoat is a 3 coat system that can be sanded and buffed in 20-25 minutes air dry or baked for 5 minutes at 130°F(54.4°C) metal temperature.
It is a 4:1 mix withActivator (#191.101)
Applied in 3 light coats wet-on-wet with no flash times between coats.
3M Adhesion Promoter 06396 is a liquid primer used for most low surface energy plastics. This would include common low surface energy plastics used for automotive dash and interior trim applications (TPO, PPO, PP, PC, PC + ABS, etc.). 25 Individual Packages per Box.
MRS-771 2.1 V.O.C. Acrylic Lacquer Primer Surfacer-Grey is a premium acrylic lacquer primer surfacer formulated for the most stringent V.O.C. regulations. This primer surfacer must be reduced with the proper Zero V.O.C. reducer to be compliant. MRS-771 has excellent adhesion with superior filling and sanding properties. For optimum performance a compliant self-etching primer or epoxy primer should be applied to bare substrate before applying MRS-771. Packaged in gallons (4 gallons/case)
Area of application:Adheres to fillers, painted surfaces, and metals including galvanized.
Characteristics:Liquid putty. Easy sanding, will not clog sandpaper. Excellent viscosity.