Additional information
Weight | 2 lbs |
---|---|
Dimensions | 7 × 7 × 4 in |
Features:
· 30% – 50% gains in cut rate, far less loading on the job and greater worklife.
· Entirely new level of work speed is attainable.
· Agressive sanding action isn`t easily dulled.
· New anti-loading agent which actually throws dust from the grain as it cuts.
· New latex-reinforced backing can withstand whatever job torture you throw at it.
· Unparalled speed, scratch consistency and an overall quality of finish never before achieved.
$79.95
In StockWeight | 2 lbs |
---|---|
Dimensions | 7 × 7 × 4 in |
The 3M 8219, Automix / Fiberglass Repair Adhesiveis a two-part urethane adhesive that is used to bond SMC and FRP (traditional fiberglass) body panels to each other and to metal. It is designed to bond composite and metal to each other, along with metal to metal applications. Requires 3M 08117, Applicator Gun to apply.
Liquid additive that can be used in small quantities with 2K isocyanate hardeners to achieve rapid through-cure. Super accelerator for 2K paints, clearcoats and primers.
Evercoat’s® easiest sanding body filler. The unsurpassed sanding qualities are attributed to Hattonite™, a unique ingredient which reduces heat and friction created by aggressive sanding. Rage Gold also contains ZNX-7® for adhesion to galvanized steel and aluminum. Plus, it’s stain resistant for use with basecoat/clearcoat paints. Part of the MetalWorks® System. Blue cream hardener included.
Uniform pressure thanks to foam backing, adaptable on shaped surfaces, fine sanding of round edges, fine sanding on flat areas, fine sanding of primer, paint and lacquers, sanding for blending uses,fine sanding before polishingm matt sanding. Can wet sand or dry sand.
The 3M™ Particulate Filter 2097 is NIOSH approved for environments containing certain oil and non-oil based particles. 3M recommended for nuisance level organic vapour relief and for ozone protection up to 10X OSHA PEL.
3M™ Particulate Filter 2097 with nuisance level organic vapour relief helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. This filter helps protect against a wide range of oil and non-oil based particulate contaminants. The filter also offers nuisance level odour relief from organic vapours that are below the PEL. Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government exposure limits, whichever is lower. Do not use for respiratory protection against organic vapours or in environments that are Immediately Dangerous to Life or Health (IDLH). The 2097 is commonly used for welding, brazing, torch cutting, metal pouring and soldering. Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. The filter is both flame and water resistant. This filter is commonly used in the following industries: agriculture, construction, general manufacturing, pharmaceuticals, primary metals.