your trusted source for automotive paint and refinishing
Shopping Cart$56.16
1
PROUDLY CANADIAN
FREE GROUND SHIPPING ON ORDERS OVER $450
View cart “NORTON 31475 6″ P240B PSA A275 Chamag Discs” has been added to your cart.
Sale!
NORTON 31642 2 3/4″ X 16 1/2″ Norgrip P180
Used for dry sanding paint, primer and primer surfacer; also for deburring, removing sand scratches, shaping and finishing plastic filler, and feather-edging repaired areas.
Part of Norton A275 Sandpaper Series
Special No-Fil coating prevents premature loading.
Heat-treated grain for up to a 50% faster cutting rate
High quality performance for increased productivity
Sheets measure 2-3/4” by 16-1/2”
Each pack comes with 50 sheets
Sheets are available in 2 grit options: P80B or P180B
High performance strip abrasive for coarse, medium and fine sanding of polyester putty filler and paint materials. It has a dust repellent coating.
High performance abrasive for machine sanding surfaces. Stands out because of its good initial abrasiveness, its high durability and the very fine finish in higher grits.
Carworx 2.1 VOC Bullet is a high production clearcoat system developed for spot repair and one panel repair. This 4:1 mix clearcoat is a 3 coat system that can be sanded and buffed in 20-25 minutes air dry or baked for 5 minutes at 130°F(54.4°C) metal temperature.
It is a 4:1 mix withActivator (#191.101)
Applied in 3 light coats wet-on-wet with no flash times between coats.
3M Adhesion Promoter 06396 is a liquid primer used for most low surface energy plastics. This would include common low surface energy plastics used for automotive dash and interior trim applications (TPO, PPO, PP, PC, PC + ABS, etc.). 25 Individual Packages per Box.
MRS-771 2.1 V.O.C. Acrylic Lacquer Primer Surfacer-Grey is a premium acrylic lacquer primer surfacer formulated for the most stringent V.O.C. regulations. This primer surfacer must be reduced with the proper Zero V.O.C. reducer to be compliant. MRS-771 has excellent adhesion with superior filling and sanding properties. For optimum performance a compliant self-etching primer or epoxy primer should be applied to bare substrate before applying MRS-771. Packaged in gallons (4 gallons/case)
Abrasives
