Two-part urethane used to bond backup strips to SMC and FRP (traditional fiberglass). Fast work time for larger backup strips and patch applications. Longer work time that 08270. Work time = 3 minutes. Clamp time = 10 minutes. Cure time = 30 minutes
20-second set urethane adhesive that replaces cyanoacrylates. Will not crack or become brittle like cyanoacrylates. Bonds to virtually any substrate and has excellent gap-filling capabilities for bonding small parts. Excellent for rebuilding cracked eyele.
3M™ Automotive Acrylic Plus Attachment Tape 06382 is a .045-inch thick, medium-density, black acrylic foam tape with high performance acrylic adhesives on both sides and a red release liner.
Acrylic Plus Attachment Tapes are OEM approved and are stronger, higher performing, high stress handling products than other automotive attachment tapes. Typical applications include body side moldings, rocker panel moldings, claddings, wheel flares, bumper trim and other exterior and interior automotive trim components.
3M™ Flexible Foam is a soft and flexible two-part urethane material which foams in place (closed-cell foam). It is designed to replace OEM’s flexible foams found on door intrusion beams, roof bows, inside body panels, pillars, and in other automotive body cavities. Expands to 10 times its original volumeto fill large cavities with a small amount of material. Can be used for OEM replacement of flexible foams to “pre-accident condition” as much as possible.
Patterned, precise mineral structures give Trizact™ abrasives the combination of fast cut and consistent finish every time. Use P1000 foam blending discs for scuff sanding blend panels prior to painting. Use P1500 clearcoat sanding discs for leveling dust nibs and sanding of mismatched orange peel. Finally, use P3000 foam disc for removing P1200-P1500 grade sand scratches prior to use of 3M™ Perfect-It™ polishing system. Foam disc used in a spot repair system for removing sanding scratches before using rubbing compound.
Carworx 2.1 VOC Bullet is a high production clearcoat system developed for spot repair and one panel repair. This 4:1 mix clearcoat is a 3 coat system that can be sanded and buffed in 20-25 minutes air dry or baked for 5 minutes at 130°F(54.4°C) metal temperature.
It is a 4:1 mix withActivator (#191.101)
Applied in 3 light coats wet-on-wet with no flash times between coats.
3M PPS 20 Spray Cup System Kit is a great way to stock up on supplies for PPS 20, our all-in-one solution for measuring, mixing, filtering and spraying paint materials for automotive, industrial, home, furniture, cabinetry and more Our latest and greatest PPS system features improvements like a quarter-turn locking collar with each lid, new paint cup in each kit, domed lid design for better spray performance, wider lid fluid spout and redesigned adapter for a more stable lid-to-gun connection Each lid strains paint material with a built-in 200-micron filter, commonly used for solvent-based paint materials Unlike with conventional aluminum or other metal paint cup systems, with PPS you don’t have to mix paint in extra cups and filter it into a paint reservoir, so you waste less paint And with a fresh lid and liner for each mix, there’s less risk of outside contamination Specially designed PPS stainless steel metal adapters let you use the PPS 20 system with virtually any spray gun Use to apply paints, stains, varnishes, basecoats, undercoats, primers, sealers, clearcoats, gelcoats, sprayable adhesives and more Kit contains 1 paint cup, 50 disposable liners, 50 disposable lids with locking collar and 200-micron filter, and 32 sealing plugs
Best Sellers
